This item is limited to 50 per household.
――Compared to conventional rail products, [Fine Track] is a new Tomix rail that pursues finer appearance and ease of handling. The rail standard and lineup are inherited from those of conventional rail products, achieving full compatibility.
--Precautions for handling fine tracks
1. Attach and detach the rail horizontally. Please be careful not to twist it. At an unreasonable angle
Repeated pulling out and inserting will damage the tip of the rail such as the joiner.
2. Make sure that the rails are securely connected before driving. If the connected rail
If there is a step between them, not only will the vehicle derail, but the rails will be damaged quickly.
3. When supplying electricity from the power unit to the rail, use the dedicated DC feeder N.
Please.
4. In order to maintain good rail energization function, all rails are diligently sold separately <6401> rails.
After polishing with a cleaner etc., wipe it dry. Be especially careful not to get oil on it.
5. Since the trackbed (base part) is made of ABS resin, it is used in high temperature places (where it is exposed to direct sunlight, heating equipment).
Do not leave it near (such as near). It may be deformed. Also, for chemicals such as thinner
Please also be careful.
* The color of the rail trackbed may vary depending on the painting method. please note that.
--About Joiner
1. When connecting rails, adjust the direction of the joiner to horizontal (or slightly upward).
Please.
2. If the joiner comes off, pay attention to the direction of the joiner when installing. Pointed part
Please be careful not to get injured.
* Never use the separately sold <6005> Joiner Repair. Damage the joiner part
It will be the cause.
--Please use the Next Neo series power unit N to drive this product.
――This product is for Tomix vehicles only. Also, for plastic wheels and cleaning wheels
Please do not use. Some lightweight vehicles and light trolleys (Thomas the Tank Engine series,
It is not compatible with the leading wheel of 9600 type steam locomotive, leading wheel of EF15, etc.).
--Dry cleaning head x 4 and wet cleaning head x 12 are included.
--Current consumption: 300mA
--Cord length: 70cm
( This is a machine translation. Please allow for possible misinterpretations in the text. )