[Adding new charm to the ultimate model]
-In addition to the thorough reproduction of proportions and details, the 1/32 Zero Fighter Type 52 was highly acclaimed for including the movable parts of the rotor blades and landing gear without impairing the sense of scale.
-Tamiya's new model is back with a new charm.
-In addition to the conventional kit, a 20mm machine barrel and pitot tube with a sharp finish made of metal are set.
-The barrel is colored and the pitot tube is plated to enhance the details.
-For marking, one type of aircraft equipped with an aircraft carrier [Hayataka] that participated in the Battle of Mariana offshore was added.
-In addition, the package has the same size as the 1/32 Zero Fighter 21 type and has the function of storing the completed model.
-The Zero Fighter 52 type that refined each part and confronted a powerful new American fighter.
-Relive the crystals of Japanese aircraft technology with the ultimate model.
[About Zero Fighter Type 52]
-Zero Fighter that continued to fly as the main fighter of the Japanese Navy throughout the Pacific War.
-Especially, in the latter half of World War II, Type 52 appeared after Type 22 in order to counter the high-speed heavily armed American military fighter.
-The engine was the [Sakae] 21 type with the same 1130 horsepower as the 22 type, but the exhaust pipe was changed from the conventional collective type to the thrust type single exhaust pipe, the wing width was shortened to 11 m, and the ends were semicircular Improvements have been made to each part, such as shaping the car to a maximum speed of 565km/h.
-As a fixed armament, two 7.7mm machine guns were mounted on the nose and two 20mm machine guns with long barrels were mounted on both wings.
-The Type 52 was deployed in the fall of 1948 and was deployed in most battles in the latter half of the war, such as the Battle of the Solomon Islands, the Battle of Mariana, and the Air Defense Battle of the Japanese mainland, and the American army that is overwhelmingly superior in quality and quantity. I kept fighting against my opponent until the end of the war.
[Moveable parts unique to Big Scale]
-Seven movable parts, which is one of the attractions of this kit.
-Although it tends to be overscaled, we have emphasized precision and reproduced it without compromising the outline and mold.
-You can enjoy the realistic movement even after completion and you can understand more about the mechanism of the actual machine.
[About the model]
-A plastic model assembly kit of the Zero Fighter 52 type that appeared in the latter half of the Pacific War.
-1/32 scale, total length 285mm, total width 344mm.
-A faithful model of the flowing aircraft line, from the engine cowl with its unique curve to the tail.
-In addition to the realistic engraving of the outer skin of the fuselage, the inside of the cockpit and the [Sakae] 21-inch engine are finished with a rich three-dimensional appearance.
-Various parts of the aircraft such as landing gear, rudder, flap are movable. The windshield and cowl flaps can be assembled by opening and closing.
-20mm machine gun barrel and pitot tube are made of sharp metal. The barrel is already colored. Photo-etched parts are available for the air intake mesh and seat belt fittings. Comes with 4 types of markings, including a mask seal for windshield painting and 1 aircraft carrier-based aircraft.
-A set of two seated and standing crew figures. A special display stand is also included, so you can display it in flight. After completion, it can be stored in the package.
-A landing gear that pursues the fun of moving in addition to precise reproduction.
-Nakajima [Sakae] The 21st engine and the inside of the cockpit are finished with a three-dimensional effect. Reproduce the difference from the Zero Fighter 21 type.
-The completed aircraft can be stored in the package by removing the additional tank and propeller.
-A set of metal-colored 20mm machine gun barrel and plated pitot tube. Etching parts are used for moving parts.
-Accurately model the aircraft line unique to the 52nd type, such as the main wing shortened to a wing width of 11 m and the refined engine cowl.
-The engine cowl that draws a delicate curve is faithfully reproduced based on actual equipment coverage.
-Thrust-type single exhaust pipe and the heat-resistant plate mold on the side of the fuselage behind it have a rich three-dimensional finish.
-Crew dolls are available in two sitting and standing poses. The goggles are made of transparent parts to enhance the realism.
-Not only the retracting mechanism of the main landing gear, but also the Oreo part can be moved by using metal parts.
-Flaps that are precisely reproduced up to the back mold and ailerons that realistically express the upholstery are also movable.
-It is full of fun to move around the tail, such as ladder and elevator.
-Pull down the landing hook and operate the stopper inside with a jig to move the tail wheel.
( This is a machine translation. Please allow for possible misinterpretations in the text. )