- = Ultimate Ultimate [Ultimate]
And ultimate
Get down the things that [, master. Moreover, the point of reaching its last]
As means, as the last point of reaching ultra-thin blade of a dedicated plastic nippers Plastic
This is the Ultimate Nipper. The highest rank of grade five sharpness.
- Sharpness is really good, characterized by breaks in the light force!
The reason for this is because the blade does not have only one.
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
Was not the case and say good or better sharpness both in the blade is in the same blade angle.
Nipper Ultimate 5.0 is cut with a knife and chopping board image.
Notes - Ultimate 5.0 features and special nippers Plastic
- With stopper to prevent the folding blade · Added new feature
That put the stopper, and the blade edge is now not hit more than necessary.
A result, the break is eliminated concerned than ever before, you can use normally.
- So good taste will be lost and disconnected when folding the parts to lose!
- Can cut the parts for light and fatigue in the hand is hard work for a long time!
- When the gate since it is less burr cut, reducing the processing time the gate!
Specifications - single edged knife
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
The image of the cutting board and cut with a knife.
- Proven durability of the sharpness! !
There also consider the durability of our customers to focus on next sharpness degradation of sharpness.
Even after a test cut of the plastic stick of φ3mm of 10,000 made in our
Sharpness did not decline than other products!
The secret is because state-of-the-art technology to tool sharpening of our own.
- Will a hole in the blade and the cutting of iron wire. Please do not cut into the absolute.
- Product specification:
· Length: 122mm
· Weight: 60g
-Blade length: 9mm about
• The length of the grip: 83mm
· · · · Coil spring spring
Light blue color of the grip · · · ·
(To prevent out-of-function opens and spring too) with a stopper to prevent too open
If you do not need the stopper, please remove the pin with pliers, etc.
• With the clash of blade protection
Part of the blade with a simple cap-
· This product is the packaging blister pack
Simple explanation-papers
Made in Japan · MADE IN JAPAN
※ One point advice on maintenance
· Please give on a regular basis to oil the moving parts, such as sewing machine oil or KURE5-56.
Lubricating oil will be, it might be difficult to play.
• After use, please I wiped clean from the blade. Can cause rust.
( This is a machine translation. Please allow for possible misinterpretations in the text. )