(HOn) Mineral Truck A (2-Car Unassembled Kit) (Model Train) - HobbySearch Model Train HO/Z Store

This item is limited to 18 per household.

- Etching brass plate kit model of the truck into a small mine.
- Vehicle is at the bottom of the stopper lever is disengaged by a lever to the left side to beat, ready to box-body (carrier) is lifted. L-type lock on the side of the other side of the opening is removed in conjunction with the lever at the same time, the body is tilted box-box-body as a fulcrum at the bottom center, and lower the load.
- The state of being dumped-up can not be reproduced with this product. The assembly is recommended for soldering.
- Was produced in New 挽物 Plastic wheels φ4mm. The jig included in the kit, you can set the gauge to 9mm. You can also support 6.5mm gauge pressed by putting (1.25mm side) spacer between the wheel and the jig.

- (Bisect 2) Kit contents: two etching plate, two plate etching bonus parts, sheet 8 φ4mm wheels, four axles, this 1.2mm × 4mm 6 screws
※ must be purchased separately: φ0.4mm brass wire, micro train couplers Mo.2004

Item Size/Weight : 15 x 9.3 x 0.3 cm / 27g