Built-in Load Resistance Digital Voltmeter `Rail Doctor` (Model Train) - HobbySearch Model Train N Store

This item is limited to 12 per household.

[Overview]
- I is quite useful to the discovery of the problem location and confirmation of the conduction state of the rail.
- Model railway dedicated

[Features]
- You can check the voltage and the like in the conditions close to the vehicle running state. (The voltmeter general, it can not be measured correctly for the no-load.)
- I find energizing defective portion of the point rail and (Joiner).
- I can be used in wide range of switchable (1A and 12V when 0.5A) 2 kinds of load resistance.
- Battery of digital non-display is not required. (Supplied by rail)
- It is a metal case High quality.
※ rail is not included.

[Specifications]
- Measured voltage: DC3V ~ 20V
- Display: 3 digits, red LED
- Current consumption: (supplied from the measured object) 30mA or less
- Load resistance: 12Ω- no load -24Ω switchtable
- Connection: I grab a clip rail
- Dimensions: (I excluding the projection part) W50 × L122 × H36mm
- Weight: about 230g

Item Size/Weight : 14.5 x 8 x 8 cm / 287g