Full length: approx 19cm.
Full width: approx 7cm.
[For vehicle]
- Mid-size car was released from the Chevrolet division of General Motors in 1964 is the Chevelle. Coupe, sedan, convertible, wagon, etc., has a wide range of body variations, drew the beginning widely popular family layer.
- In addition, high-performance model also appeared in the line-up, which was equipped with a powerful high-performance V8 engine of 396 cubic inches.
Given the naming of Chevelle SS, and not only was highly popular attract muscle car fan growing popular in the 1960s in the United States, and I was used as the base vehicle in motor sports scene, such as drag racing.
[The model]
- Model reproduced tune-up model of the 1967 type Chevelle, the Pro Street specifications 1/25 scale. Finish overall length about 19cm, I was modeling in presence plenty of carefree styling of '60s American cars unique in width about 7cm. Before and after the bumper and grill set the plated parts. Lens headlights clear parts, in addition tail lamp clear red parts are set to, and increase the feeling of finish.
- Bonnet desorption, or assembled in the open state is of course can be selected, and reproduce the powerful V-8-cylinder engine in the engine room. Valve cover and carburetor, air cleaner, etc., plated parts also Ogora, it is finished you feel the power. Of course, such as wiring and piping, other than it is enough to shake the arm to detail up.
- Spartan atmosphere room also roll bar has been spread around in the bucket seat Pro Street unique. In addition also firmly modeled before and after suspension and drive shaft chassis, the mechanical finish with three-dimensional effect. Wheelie bar is the features that can not be overlooked for being modeled.
- Tire to be combined in the plating wheel even slick tires set to rear tire, can be selected. Goodyear logo is already printed on the sidewall to slick tires.
Car model fan, is one that can not be overlooked in the Above all American car fan.
[Main Features]
- Total length of about 19cm, width of about 7cm
- Plated parts, such as front and rear bumpers and grille
- Clear parts in headlights, the tail lamp and use the clear red parts
- Bonnet can be manufactured by selecting detachable, the open state
- Wheelie bar also modeled
- On the side walls to slick tires Goodyear logo printed
( This is a machine translation. Please allow for possible misinterpretations in the text. )