Grade Up Sticker for ED79 Cab Wall Sticker (for Kato Product) (for 1-Car) (Model Train) - HobbySearch Model Train N Store

This item is limited to 24 per household.

- New release cab back parts for various locomotive! !
- Locomotive who are leading the various train, to a variety of activity.
- Indoor cab back parts to reproduce the brave figure more feeling basis will be released new.
- Installation is quite easy.
- You can reproduce the back equipment as seen from the front just stick to the light-shielding parts.
- Parts and has been cut by a laser, we are easy to paste.
- Please make the means your existing grade up of the vehicle.

- Contents: ED79 cab back
- Are bonded Tsukekata:
(1) Remove the cab of parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) I will return the beam finished parts to the original position. You are able to make classification at the 1-position side and the second place side, please be careful to mounting. (Is shorter high-voltage cable is first place side)
(4) It is a complete re-assembled to restore.
- Use Material: resin adhesive sheet
※ We produced a vehicle to reference but there is a part that is different from the actual vehicle.

Item Size/Weight : 12.5 x 7 x 0.1 cm / 2g