This item is limited to 3 per household.
- This is a plastic model assembly kit that reproduces the masterpiece of SF, the representative spaceship of Star Trek, USS enterprise No. NCC - 1701 on 1/537 scale which is also about 55 cm in total length.
- The model still reproduces the biggest popularity of the Star Trek series' first work, the enterprise appearing in TOS, at a big size.
- Moreover, it is attractive that this model can reproduce each part in the cut model, such as the 1st hull, the 2nd hull, the Dorsalfin part and the Warp nacelle.
- Disk shaped first hull cut from the front through the deck of the center part to the back.
- In the cross section, we set some somewhat thick parts where the internal structure of the first hull is expressed and express the appearance and composition of each floor.
- The second hull and the part of the dorsal fin part also have the front panel as separate parts and reproduce the inside. The structure of each floor and the interior of the engine room are also mechanical finish.
- And the two warp nacells are cut in half on the right side and reproduce the structure inside the warp nacelle.
- Of course, parts of the first hull, the second hull, and the warp nacelle are set firmly as parts of the parts removed as a cut model, so it is also possible to display in a combined state.
- The interior representation of the cut part is the sieve of the arm to paint and detail up.
- You will be able to enjoy finishing with reference to package illustrations.
- After being released in the past, Star Trek fans can not miss only resale of out-of-stock popular models.
- Dome type display base is set in the kit. It is a model I would like you to build carefully.
[Major features]
- Star Trek's representative spaceship, USS Enterprise No. NCC-1701 finished and modeled in a big size that will be 55 cm in total length
- Reproduction of parts such as the first hull, the second hull, the dozarufin part and the warp nacelle in the cut model
- Disk shaped first hull cut from the front through the deck of the center part to the back
- The second hull and the part of the dorsal fin part are also different parts of the front panel
- Parts of the part removed as a cut model are also set firmly, and in a combined state
Can also play
- Dome stand, useful for display
( This is a machine translation. Please allow for possible misinterpretations in the text. )