This item is limited to 6 per household.
[Prototype]
- KoWaka is large railcars to represent. In the date wheel streamlined vehicle, yn 9 and 10 in 1935 is, yn 11, 12 and 13 has been Zo備 the following year.
- It is a formality gasoline engine GMF13 (vertical six-cylinder gasoline engine 100hp) but had been installed, in the 1950s, retrofit has been carried out in the DMH17B (vertical-type eight-cylinder diesel engine 170PS).
- Then, that launch the exhaust pipe with a cover from under the floor in front until on the roof, there was also time for modification work has been carried out.
- In addition, many, it is variously changed variation of the headlight.
- Yn 12 only, in 1960 is carried out of the vehicle body renewal work in Daitetsu vehicle industry, was transformed into a distinctive appearance of H rubber front window, and was second break to KIHA 12.
- At the 1969 KoWaka railway line abolition of, yn 9 and 11 but has been dismantled disposal, and Kiha 12 is an update car, yn 13 have been transferred to port railway Okayama.
- Prototype of this product as a figure of his later years, it will reproduce the appearance that certain features.
- In particular, it was fabricated stuck under the floor equipment is the railcars of the real thrill.
[Kit Summary
- To etching body, it is configured to combine Lost made the front part, the roof plate.
- Etching the material, in addition to brass plate, for securing strength as well finely finished, we used a nickel silver sheet to a part.
- Rooftop equipment, floor equipment parts, various lost-made parts, has become a white metal parts, all I will come with the kit.
- So comes also front external exhaust pipe cover, install in taste.
- Bogie frame is made of Lost.
- DMH17 engine, lost in the integral part, I've made also floated exhaust pipe.
- To make the best use of its appearance, the motor is placed on the floor, it has lowered its output on the engine output shaft in Supagiya.
- In close to the actual vehicle form, it will drive one side of the bogie. Wheel, gear such is the configuration if you use the MP gear and the like.
- Motor, consolation mini motors, etc., please use a diameter of φ12x10D.
- The wheels, it does not include. On one side the truck, please use the MP gear and the like.
- Made NS drive unit, available such as a power track is also available. It does not include the coupler.
( This is a machine translation. Please allow for possible misinterpretations in the text. )