This item is limited to 3 per household.
── realistic by simply assembling finish
[About Yakushiji east tower]
- Is started erecting the 680 years of the Asuka period, Yakushiji was transferred to the current land due to the 710 years Heijokyo cents. The only buildings that have survived from those days founded in the is the east tower.
- It looks at first glance sixfold because it has a small roof called Mokai (Mokoshi) in each layer, but actually in the tower of the triple, and is affectionately known as' anti-freeze is music from the figure in motion that overlaps the size of the roof It has.
- Height 34.1m. It was designated a national treasure in 1951.
- In addition, in 1998 and it was also registered in the part and is to UNESCO World Heritage Site of construction heritage in the Historic Monuments of Ancient Nara].
[The model]
- Model is the wooden model assembly kit that was reproduced in 1/70 scale Yakushiji east tower.
- The parts we have reproduced in feel plenty of beautiful appearance that is the roof of the equipped with large and small overlap the Mokai using the cypress.
- Also modeled in detail complex shapes, such as rafters that support the eaves.
- Details such as the parapet of the bridge railing has also been firmly expressed.
- In addition, Sorin tower on the ridge-end tile and towers, spray part set the metal parts.
- Even if obtained at completion of height 555mm to receive their music, width, it will reproduce in depth each 300mm.
- Part Using cypress material I am looking forward to with time even after completion go Utsurikawa~tsu also texture.
- Please the Yakushiji Temple east tower that it is impossible to see the figure with a major repair until 2019 been assembled in your hands.
- Align make the west tower, which is modeled on the same scale, it is a good idea even to try thinking of the flow of time of 1300.
[Main Features]
- Finish with presence of total height 555mm
- 1/70 scale
- In part to use the cypress
- Also modeling complex shapes, such as rafters that support the eaves
- Pug-ugly and to set the metal parts, etc. The Sorin tower of the top of the tower
- Finished Size: Side 300 × height 555 × depth 300mm (including display stand)
- Reference production time: 50 hours
※ You must have some paint.
※ The assembly is required adhesive.
( This is a machine translation. Please allow for possible misinterpretations in the text. )