Carbide Scribing Needle 10 (Hobby Tool) - HobbySearch Hobby Tool Store

This item is limited to 10 per household.

See Carbide Scribing Needle 30 (Hobby Tool) also.

- It is a precision tool that has been developed for marking.
- Add and re-carving of the mold, you can use to draft such streaks carving.
- Tip has achieved outstanding sharpness and high durability in a very hard cemented carbide (tungsten carbide).
- Therefore, the cutting edge is difficult to reduce rubbing, it is possible to draw a sharp, clean line.
- Tip angle of the two types of 10 ° and 30 °. The angle of the tip in a color-coded color ring and display the seal for each angle also you can see at a glance.
- Carbide marking needle 10 ° is closed is thin and sharp lines, but the cutting edge for very delicate, is a medium and advanced users.

- Kiwaza until the holder or φ3.2mm will be used in wearable pin vise, etc.
- Please scribed by the force of the extent to touch lightly on the surface.
- It is a trick that the scribing without putting the force draw a clean line.
- Or rough and put a force working surface, there is a possibility that the cutting edge is damaged.

- The storage of carbide marking needle can be used streaks carved carbide protective case

Item Size/Weight : 9.6 x 5.9 x 2 cm / 9g