1/80(HO) Interior Parts for Kato HO OSHI24 Passenger Room Parts (for 1-Car) (Model Train) - HobbySearch Model Train HO/Z Store

This item is limited to 50 per household.

- Indoor parts new sale for the dining car!

[Contents]
- cloth tablecloths
- wall paper parts door seal parts
- Floor seal parts waiting room cloth seal

[Attaching]
- Wash and remove the interior parts. (For molding agent removing)
(1) first to paste the floor parts. When is the work of a later, there is a possibility that the other part is to failure.
(2) Paste from put a double-sided tape the paper parts on the back to a predetermined portion.
(3) Attach the grain seal parts to partition part.
(4) door parts to the silver door parts, and attach from the put a smoke film of the window portion ahead on a predetermined portion.
(5) Attach the blue cloth parts to chair parts of the waiting room.

- table cloth will be easy to process and paste as a single unit and disconnect the table parts. The excess of the corner portion is also good as it is, but you may be cut as of the accompanying Sample images image.
- cover of the chair part of the waiting room, the better the appearance and reproduced in the table cloth other crimes.

[Notes]
- it does not assume any responsibility Niokimashite such as contamination or damage at the time of processing.

Use Material]
- cloth
- paper
- Cutting sheet

Item Size/Weight : 23.3 x 7 x 0.1 cm / 9g