- Scale 1/80 · 16 · 5 mm gauge railroad model
- JR West approved
- Finished product with interior specification
※ This product is a brass model (metal model) using metal such as brass as the main material.
[About actual vehicle]
- Kumoru 145 · Kuru 144 type was born as a new performance distribution train by remodeling the JNR 101 series train.
- Since the forehead of this model was brass pressed and the actual car was reinforced with the car body, it was newly drawn based on the fact that the front head was longer than the original 101 series.
- The equipment on the roof was made of precision lost wax, and the piping was soldered by a craftsman carefully bending the brass wire.
- Reflect the mesh pattern of the carrier and the motor check lid of Kumoru, please enjoy your favorite baggage on it.
- Horizontal hinged hinges were manufactured with precision lost wax, soldered without spending time and effort one by one.
[About model]
- Manufactured mainly using brass material, brass press processing in the forehead.
- Headlight, taillight ... lit (with ON / OFF switch)
- Interior light ... none
- Connector ... Top part: close contact coupler, middle part: pea extensible coupler
- Truck ... DT-21
- Pantograph ... PS-16
- Power: Equipped with Canon LN-12 double-shaft motor shaft drive + Φ 10.5 mm plate black wheel + WB 26 mm MP gear × 2
- Unoccupied room ... Detail of the loading part is reproduced by etching etc.
- Interior ... Waiting room seat, reproduction of part of indoor equipment direction direction curtain ...
- Other ... Wiper / car number Letter seal etc are installed by customer
(The above is the current planned specification, it may be changed in future)
[Organization Example]
- Cumul 145 (M) + Kuru 144
* Depending on the structure of the vehicle, the mounting position of the motor may change.
[Major features]
- Aori Dojo produced with precision lost wax, soldering carefully one by one.
- Reproduction of the loading pattern by etching, of course, the motor inspection lid of Cumoru 145 is reproduced with different parts.
- Please enjoy your favorite parts on the loading platform (loading of cooler etc is not included).
- On the roof · The wing surface piping was manufactured by a skilled craftsman by processing a brass wire by hand bending.
- Installed front ATC car shooter and painted with blue to make it a one point accent.
※ Release timing · price · specification etc are subject to change without notice.
- Scheduled release date: released in December 2016
( This is a machine translation. Please allow for possible misinterpretations in the text. )