- Green Max Economy Kit Series (Unpainted Board Kit)
- Truck, panta, power unit sold separately
[Commentary]
- From 1974 (Showa 49), the 103 series of specifications adapted to the ATC conversion of the Yamanote line and the Keihin Tohoku line were manufactured. The appearance was changed mainly in the front part, the front window was shrunk by the high driving platform, and it was decorated with a stainless steel belt under it. From 1979 (Showa 54) year, some cars with no ATC for part of the railroad were added, and a rear door pocket window on the side of the crew member room was established. Cooling by the centralized cooler was done for the initial type, but there is also an inverter cooler mounted type that can be remodeled at a low cost in a short period for the remodeled car of JR East.
- The product consists of 4 unit windows with body roof integral type and 2 early intermediate cars of assembled type, and 2 centralized type and inverter cooler are included for each 2 cars. You can also reproduce the ATC car by plugging the rear door closet window on the side of the crew member room with a plastic plate or the like. An entrance for reproducing the louver is attached.
[Optional item]
- Dolly: No. 5004 DT 33 (for Moha), No. 5029 TR 62 (for Kuha and Saha)
- Power unit: No. 5511 DT 33
- Coreless motor power unit: No. 5711 20 m class A
- Power bogie frame · Underfloor equipment set: No. 8483 B-01
- Pantograph: No. 5801 PS 16 N, No. 5812 PS 16 W (for JR West Japan)
- Intermediate car 2-car set: No. 432-1 101 intermediate wheel, No. 435-1 103 intermediate wheel
- Cooler: No. 95 - 3, No. 70 - 8 etc
- Skirt: No. 62-2, No. 62-3
- Vehicle mark: No. 6304, No. 6313
[Color guide]
- Body: (6) Blue No. 22, (11) Vermillion # 1, (12) Huang No. 5, (15) Yellow Green No. 6, (36) Blue Green No. 1
- Rooftop equipment: (9) Gray No. 1
- Roof: (35) Dark gray
- Underfloor equipment: (10) Black
- Window sash: (8) Silver color
- H rubber: (9) Mouse color No. 1 or (10) black
- Tail light: Mr color (47) Clear red
- Surface protection: (40) clear coat (gloss) or (44) clear coat (half gloss)
[Drill Blade Guide]
- φ1.2 mm
- φ1.5 mm
- φ1.8 mm
- φ 2.0 mm
※ For assembly use plastic model or rubber type adhesive.
[Specification change information (difference from old product)]
- Specification change version will be revised product contents.
- The sticker that came with the previous product is not included.
- JR East commercialization licensed
- JR West commercialization licensed
( This is a machine translation. Please allow for possible misinterpretations in the text. )