- Pre-colored series of Economy kit has appeared.
- Colored Economy Kit (old country electric appliance series)
- About the Kuha 55 shape
The same 20 meter class controlled car which was produced simultaneously with Kumoha 41. The 41 series was initially introduced intensively into the Kansai area, but when it comes to be used later in the Tokyo area, in order to respond to the long formation of the formation, the type of Sakha 57 type (the type in which the driver's room of the Kuha 55 shape was removed ), Saloha 56 type (type with semi quality of Sakha 57 shape as 2 etc), Khani 67 type (type with a half room of Kuha 55 type as a luggage room) etc. are continuously produced, and the prewar type 20 m power saving It became one standard type. In the Kuha 55 shape, a remodeled car from Kuroha after the war, the one attached with a driver's cabin to the Sakha 57 shape (color diagram (2) it), etc. were massively imported, and as a result it was not changed to the Kumoha 41 shape, It became rich form. The kit is the figure of the initial wife type postwar update.
- Color and Organization of Series 41
The paint color of the 41 series after the war was all bright until the first half of the Showa 30 's, all of the late half of the 30' s Osaka area (Katamachi, Hanwa, Seongdong - circle line after) - (1) Ska color (Iida, Central west, Shin-Etsu, Mobi, Naganohara, Nikko), (2) Sky blue (Omi, Mino Akasaka, Toyama Port), (3) Budo color + front warning color (Ube, Onoda) and so on have been applied separately. (4) Orange color for Osaka district (mentioned above) disappeared with new performance relatively quickly.
In addition, the organization was not constant at all other than the one in which the well-organized arrangement of only 41 series was seen in the Ube Onoda line etc in the later years, and it was used freely mixed with each other old series. (One example was shown in the figure below.)
- Optional items:
· Truck: No.5024 TR23
· SNOWROW: No. 62
· Disruptor: No. 62-1
· Vehicle mark: No. 6301
- Color guide:
· SP-09
SP-10
· SP-11
SP-35
- Drill blade guide:
· Φ 2.0 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )