- Reproduce the Destroyer of the Republic of China with a big scale model of 48 cm!
[Major features]
- Reproduced key / run class destroyer operated in ROC (Taiwan) Navy since 1/550 on 1/350 scale
- Hull parts are used to reproduce shapes firmly using slide dies
- Can be assembled by selecting either full hull type or offshore type
- Bulge of Sonar Bow at the bow and expression on the side of the hull also realistically
- Modeling of screws and ladders at the ship bottom
- Full dedicated display stand is also available
- Realistic reproduction of superstructure, bridge bridge, chimney, mast, radar etc on deck parts
- Harpoon 4 consecutive launch barrel of course delicately reproduced
- Etched parts to detail detail sharply are also set in detail
- Markings are available for [Kee Lung], [Su Ao], [Tso Ying], [Ma Kong] all key markings
[About the actual ship]
- The destroyer of the Republic of China (Taiwan) Navy commissioned from 2005 to 2006 is the key and run class.
- Originally four vessels were built from 1978 to 1980 as a US Navy missile destroyer Kid class.
- Originally developed for the Iranian Navy, each Kid-class ship built by the Iranian Revolution that occurred in 1979 was to be deployed in the US Navy.
- Design modification was made according to the air defense plan planned by the US Navy at that time, and the 4 ships were commissioned from 1981 to 1982.
- It was operated in the US Navy from 1998 to 1999.
- The fleet defense capability of each ship was a navy that showed interest after retiring from the US Navy, but it was decided to sell it to Taiwan instead of the Aegis ship that eventually was handed over.
- In delivering to Taiwan, refurbishment was given to the weapons and others, two ships were delivered in 2005 and two ships were delivered in the following 2006. - Reference drainage is 7062 tons, and in the Republic of China navy, they are given the name of [Kee Lung], [Su Ao], [Tso Ying], [Ma Kong] and are continuing their activities.
[About the model]
- Destroyer operated in the Republic of China (Taiwan) Navy since 2005, Destroyer of key and run class was reproduced on 1/350 scale.
- Finished Large size plastic model assembly kit with a total length of about 48 cm.
- We are modeling key-run classes based on the US Navy's Kid-grade kit which has already been released and highly valued.
- The hull parts of the kit are reproduced firmly using the slide mold.
- It can be assembled by selecting either full hull type or offshore type.
- The inflation of the Sonar Bow at the bow and details on the side of the hull are also expressed in realism.
- When assembled into a full hull specification, of course the model of the screw and ladder of the ship bottom.
- A dedicated display stand is also available.
- Upper parts of the deck parts, bridges, chimneys, masts, radars, and antennas attached to the top of the mast and bridge are also realistically reproduced.
- Mechanical finish tells the charm of the active ship.
- In addition, including 5-inch single gun main gun, Mk.26 consecutive missile launcher, harpoon 4 shooting launcher as well as delicately reproduced.
- In addition, etched parts are also set in detail, directing details sharply.
- Marking prepares all markings for 4 key / run class 4 ship.
- A unique ship of interest is also indispensable for ship model fans' collection.
( This is a machine translation. Please allow for possible misinterpretations in the text. )