Skirt Set (Compliant Products: The Railway Collection/Tight Lock TN Coupler) for Tobu Series 8000 Renewaled Car (3D-010 x 2 Set) (for 2 Formation) (Model Train) - HobbySearch Model Train N Store

This item is limited to 50 per household.

[ Recommeded Items ]
- The Railway Collection Tobu Railway Series 8000 Renewaled Car Nostalgia Sage Cream Color (4-Car Set)
- The Railway Collection Tobu Railway Series 8000 Renewaled Car Formation 8175 Standard Set (Basic 4-Car Set)
- The Railway Collection Tobu Railway Series 8000 Renewaled Car Formation 8506 (2-Car Set)
- The Railway Collection Tobu Railway Series 8000 Two-tone Color (4-Car Set)
- The Railway Collection Tobu Railway Series 8000 Flying Tojo Go Revival Color (4-Car Set)
- The Railway Collection Tobu Railway Series 8000 8163 Formation Urban Park Line (6-Car Set)
- The Railway Collection Tobu Railway Series 8000 Formation 8577 Standard Revival Color (2-Car Set)
- The Railway Collection Tobu Railway Series 8000 Formation 8570 Kameido Line/Daishi Line (2-Car Set)

[ Optional Parts ]
- [ 0375 ] Fully Automatic Type TN Coupler (SP Gray 6pieces)

- Iron College Tobu 8000 series (for updated cars)
- 2 compartments
- Affordable package that 3D-010 entered for two organizations!

[Tobu 8000 series renewal car skirt]
(1) Cut the part carefully from the runner using a nipper or cutter knife.
(2) After the base treatment and painting, attach it to the TN coupler as shown in the attached drawing.
- Mount in the hole of the base part of the TN coupler, fix it with instantaneous adhesive.
- Remove the jumper plugs on both sides of the trunk receivers.
※ The attached figure is non-jumper plug side.
* Be careful with the handling of delicate air hose.
- Corresponding coupler: JC 0375

- This product has been subjected to degreasing treatment at the time of inspection, please remove the oil and powder etc on the surface with a neutral detergent etc. at the time of painting, and then paint with the primer or the surfacer on the ground treatment .
- When bonding this product, instant adhesive is the best.
- Because this product is a material vulnerable to bending and impact on the properties of the material, please avoid bending and repeated detachment.
- Material: Acrylic (3D printer output)

Item Size/Weight : 8.5 x 5 x 0.3 cm / 1g