[Choose RC mechanism freely and drive 1978 F1 champion machine]
-An innovation that appeared in the 1978 Formula 1 Grand Prix Round 6 Belgium GP, decorated the pole-to-finish, and won the championship titles of both drivers and teams without waiting for the final race after showing the overwhelming speed Complete wing car, Lotus type 79 electric radio control car.
-A beautiful form called black beauty is realistically modeled with polycarbonate. The characteristic pinstripe that shines on the black body and the sponsor logo are already pasted.
-Just by installing your favorite RC mechanism, you can enjoy plenty of F1 Grand Prix history masterpiece machine running.
[F104W chassis adapted to the 1970s dimensions]
-The slim chassis with the battery installed vertically is based on F104 with a double deck frame composed of FRP with an upper 2.0mm and a lower 3.2mm thickness.
-The front suspension arm for the F103 chassis was used to match the wide dimensions of 1970.
-The suspension is a 3P type with front kingpin / coil spring independent left and right, and rear FRP plate flexure controlled by friction plate and coil spring.
-The tire is made of hollow rubber with a real feeling both front and rear, and the inner sponge is equipped inside.
-A ball differential is built into the spur gear, and the motor pinion adopts a high-efficiency direct drive 2WD that directly drives the spur gear, realizing a sharp run unique to a formula machine.
-Length 461mm, width 205mm, height 94mm, body weight 800g (not including RC mechanism and battery)
-Tread = F: 170mm R: 156mm
-Tire width / diameter = F: 31 / 56mm R: 50 / 67mm
-Frame = FRP double deck
-Drive system = Horizontal motor rear direct drive 2WD
-Differential gear = ball differential
-Steering = Equal length 2-part tie rod type
-Suspension = F: Kingpin coil spring R: T bar rigid
-Gear ratio = 4.16: 1 (using 25T pinion / 104T spur gear)
-Motor = 540 type
-Speed controller = ESC specification (sold separately)
[What you need separately]
-Fine spec 2.4G electric RC drive set
-Power supply for transmitter (4 AA batteries)
( This is a machine translation. Please allow for possible misinterpretations in the text. )