This item is limited to 50 per household.
- We will release the power generator cabin internal generator parts of the 24 type fixed formation passenger car.
- It corresponds to KATO crab 24 - 100 series.
- The left and right walls are shifted inward by about 3 degrees so that the light of the interior light hits a little.
- Please do use it for upgrading your existing vehicle.
- Description: Generator engine section, crew cabin · floor expression
- Separate the paper member with a well-cut cutter, etc. and paste it with a double-sided tape etc. on the passage wall surface etc. of each vehicle. (There is also a spot placement point.)
- It is an atmosphere-oriented part. Please pardon the color difference of the generator section.
- As it is a detailed work, please process one day a day as a guide.
* Although we are making reference to actual cars, there are parts that differ from actual cars. Please note. Moreover, we can not assume responsibility such as damage during processing.
- Material used: paper · cutting sheet
[How to use]
- Generator engine part:
(1) Cut the wall parts with a cutter or the like.
(2) Box the wall parts.
(3) Paste double-sided tape etc. on the back of the expression sheet and detach the corresponding part.
(4) Paste the sheet on the wall part. (Both ends are the color of the ground of paper parts, but please paint those who are worrisome.)
(5) Install with a small amount of adhesive so that it can cover the relevant part.
- Floor part:
· Paste the double-sided tape on the back of the parts sheet, cut and paste it with a cutter etc.
- Vehicle end switchboard:
· Please paste according to your preference.
( This is a machine translation. Please allow for possible misinterpretations in the text. )