[Plenty of action is too interesting! ]
-Hornet debuted in 1984 and created the boom of 2WD off-road cars.
-This is an electric radio control car assembly kit that cutely deforms this Hornet.
-The body and rear wing have a light and durable polycarbonate with a relaxed back and forth that emphasizes the cockpit.
-With marking stickers and mask seals that are convenient for painting windows, the body can be easily finished just by painting with black and sticking the stickers.
-In addition, the front and rear light cases are equipped with optional 5mm diameter LEDs to create a real car feeling.
-Also, pay attention to driver dolls in T-shirts that make driving fun.
-In addition to stickers with five different facial expressions, the helmet has a separate visor and chin guard, so it can be finished in various specifications.
-The chassis is a rear-wheel drive WR-02CB that can be played anywhere from paved roads to bumpy off-road.
-It is a fun-filled playmate who can enjoy performance improvement and setting with abundant optional parts for WR-02.
[Rear wheel drive WR-02CB chassis packed with fun to run]
-Chassis adopts WR-02CB based on WR-02 of rear wheel drive.
-By devising the mounting position of the motor and battery, it is easy to run and easy to wheelie, so you can choose where to run from on-road to off-road.
-Also, the gear case that is a little cumbersome to assemble is also a point that is completed with the motor attached.
-The suspension is equipped with a CVA oil damper on the long suspension arm, enabling stable running even in rough off-road conditions.
-Also, on the side of the chassis is a side guard that protects the motor from accidental falls and draws out the buggy.
-The wheelie bar attached to the rear part not only prevents the wheel from falling when it is wheeled, but also allows the wheelie to be adjusted by changing the mounting angle.
-The colorful combination of orange and white has a 2-piece structure.
-The tire has a highly straight rib pattern on the front and a round block with grip on the rear.
-Rounded and uniquely shaped bubble tires add to the comical mood.
-Length 356mm, width 244mm, height 191mm, car weight = about 1270g (not including RC mechanism / battery)
-Motor = 540 type
-Drive system = Rear wheel 2 wheel drive
-Tire width / diameter = front 46 / 95mm, rear 56 / 98mm
-Tread = Front: 189mm, Rear: 186mm
-Frame = resin monocoque type
-Differential gear system = 3 bevel differentials
-Steering tie rod = 2 split
-Suspension (both front and rear) = double wishbone
-Damper = CVA oil damper
-Gear ratio = 1: 18.3
[Separately required items]
-Fine Spec 2.4G Electric RC Drive Set (RC Model)
-4 AA batteries for transmitter
( This is a machine translation. Please allow for possible misinterpretations in the text. )