[Futuristic body running is fun! ]
-An electric RC car assembly kit that reproduces a three-wheeled motorcycle with one front wheel and two rear wheels.
-The cornering while tilting the body is exactly the bike itself.
-Plenty of fun to run.
-The body is inspired by a near-future dual-purpose city commuter with a large canopy and is made of polycarbonate that is light and shock resistant.
-Hyper designer Takayuki Yamazaki who worked on RC Buggy [Dual Ridge] and Mini 4WD [Decross Series] is also in charge of the rider doll wearing a T-shirt wearing a helmet.
-Helmets with visors and chin guards as separate parts are finished in various specifications, and 5 types of eye stickers that can change facial expressions are also available. We will stick to rider dolls and produce the fun of running.
[Uses T3-01, a three-wheel chassis with a function to get up on its own]
-The chassis is T3-01, which features cornering full of action by tilting the car body.
-Consists of a front section equipped with an RC mechanism and battery, and a rear section that integrates a motor and gearbox. The front and rear sections are connected by a rotating roll shaft.
-The movement of the servo mounted on the front section is transmitted via a link, and the reaction of moving the rear section creates a movement that tilts the front section left and right.
-In addition, even if it falls down, it is also a point of attention that it gets up by itself by just operating the transmitter.
-The mechanism is a support arm attached to the cornering servo.
-If the steering wheel is turned in the direction that it falls, the support arm in conjunction with the movement of the servo moves to change the position of the center of gravity of the car body and raise the car body.
-Standing up is fun to watch and you will surely be crazy about its operation along with cornering.
-The suspension is a telescopic type with a front-like shape and function similar to a motorcycle.
-The rear is equipped with a [Cam Slide Suspension] that incorporates suspension and damper functions in a compact layout.
-The rear axle has a built-in [planetary differential] that enhances turning performance, so you can enjoy light driving even in a small room.
-Model length 260mm, width 135mm, height 185mm
-Wheelbase = 196mm
-Tire Width / Diameter: Front 21 / 61mm, Rear 25 / 59mm
-Rear tread = 91mm
-Frame = Monocoque type
-Drive system = rear wheel drive
-Differential gear = planetary type
-Suspension = Front: Telescopic type, Rear: Cam slide type
-Gear ratio = 10.7: 1
-With 370 type motor
-Speed controller = ESC specification (sold separately)
[Separately required items]
-Fine spec 2.4G radio set (with TRE-01)
-4 Tamiya AA batteries for driving or Tamiya LF-1100 6.6V Racing Pack (M)
-4 AA alkaline batteries for transmitter
( This is a machine translation. Please allow for possible misinterpretations in the text. )