[Special specifications with a nice painted body]
-The Tirel P34, the only six-wheeled machine ever built in the 1976 Formula One Grand Prix, which has created a sensation.
-The following year 1977, with the First National City Bank as the main sponsor, changed to white & blue coloring.
-We adopted a full cowl with excellent aerodynamics, but at the Monaco Grand Prix we struggled by returning to the previous year's cowl.
-A specially designed electric radio control car assembly kit that reproduces the 1977 Monaco GP specifications.
-Paint the body made of polycarbonate, engine, rear wing etc., and cut out the complex cut part of the body.
-You can finish the body just by sticking the paint and stickers of the driver.
[Pursuit of running of F103 modified to six-wheel specification]
-The chassis is modified to a 6-wheel specification based on the high-efficiency direct drive 2WD and F103.
-Four-wheel kingpin coil spring with a lightweight, simple half-double deck frame made of FRP upper 1.5 mm and lower 2.5 mm thick, and an integrated lower arm and separate left and right upper arms at the front Independent suspension.
-Steering four wheels with one servo.
-The rear is a rigid type that controls the curvature of FRP T-bar with TRF damper and low friction pad.
-The spur gear has a built-in ball differential that demonstrates the limited slip effect.
-In addition, torque tune motors are equipped as standard, and light and grippable sponge tires are mounted on the front and rear wheels.
-A unique driving taste is also an attractive model.
-Total length 430mm, total width 200mm, total height 108mm, body weight 735g (RC mechanical, battery not included).
-Tread = F: 140 mm R: 155 mm
-Tire width / diameter = F: 23/44 mm R: 45/64 mm
-Frame = FRP half double deck
-Drive system = horizontal motor rear direct drive 2WD
-Differential gear = ball differential
-Steering = Equal length 2-split tie rod type
-Suspension = F: King pin, coil spring R: T bar rigid
-Gear ratio = 4.5: 1 (using 14T pinion / 63T spur gear)
-Motor = Torque Tune
-Speed controller = ESC specification (sold separately)
[What to buy separately]
-Fine spec 2.4G electric RC drive set
-Power supply for transmitter (4 AA batteries)
-Total length = 430 mm
-The picture is the assembled and painted kit.
( This is a machine translation. Please allow for possible misinterpretations in the text. )