[A cute 4WD car that can be wheeled]
-This is an assembly kit for 1/24 scale electric radio control car with a deformed lunch box, which is familiar with mini 4WD and RC.
-Attractive compact size that can be played anywhere, indoors and outdoors.
-The body is made of light and shock-resistant polycarbonate.
-Painted in yellow, with holes for wheel arch cutting and body mounting.
-The gear drive 4WD chassis combines the front and rear differential gears and the short wheelbase to achieve outstanding turning performance.
-Wheely driving is also possible simply by squeezing the throttle lever of the transmitter.
-A fun and cute RC car full of fun and smiles.
-The body reproduces a popular lunch box with polycarbonate.
-Adoption of a magnet-type one-touch body mount makes it easy to attach and detach the body.
-The body is painted and some holes such as wheel arches have been drilled and cut.
-Even for beginners, you can easily finish the body just by putting a sticker and enjoy driving.
[Adopting a gear drive 4WD and SW-01 chassis packed with fun driving]
-A 4WD chassis packed with pleasure in a compact body of almost A5 size with a total length of 190 mm and a total width of 150 mm.
-A 370 motor is set in the center of a slim and strong monocoque frame, and a gear drive 4WD that transmits power back and forth with gears is adopted.
-Combined with 70mm diameter tires for powerful driving.
-A heavy battery is mounted on the upper rear of the vehicle.
-Wheely driving is possible just by starting suddenly.
-The suspension is a strut type 4-wheel independent with coil spring.
-Adopts a mechanism that connects the suspension upper with the left and right arms and interlocks with the steering.
-The roll during cornering is suppressed, and combined with the effect of the differential gear installed on the front and rear, it offers outstanding turning performance.
-Reduces body roll during cornering to reduce falls.
-No matter where you run, from indoor to outdoor.
-Upgrade to 4WS (four-wheel steering) specification is possible simply by installing the [OP1898 SW-01 Upper Arm Connect Bar (RC model)].
-Length 190mm, width 150mm, height 140mm
-Tread = 122mm on both sides
-Tire width / diameter = 28mm / 70mm for both front and rear
-Frame = monocoque type
-Drive system = gear drive 4WD
-Differential gear system = planetary type
-Steering tie rod = 3 split
-Suspension = front and rear MacPherson strut type
-Gear ratio = 21.88: 1
-Speed controller = ESC specification (sold separately)
-Motor = 370 type
[Separately Required Items]
-Fine spec 2.4G transmitter set (with TRE-01)
-4 Tamiya AA batteries for traveling or Tamiya LF-1100 6.6V racing pack (M size)
-4 AA batteries for transmitter
( This is a machine translation. Please allow for possible misinterpretations in the text. )