[French popular car that looks good with rally equipment]
-A popular car Citroen 2CV representing France, which has been produced for over 40 years until 1990 and became a global long seller since it was announced in 1948.
-Not only has it helped to drive French motorization, it is also known for its participation in motor sports, especially rallying. It is an electric radio control car assembly kit of the Citroen 2CV finished with the image of such a rally tank.
-The polycarbonate form realistically reproduces a form that you love, such as an independent front fender or a spat-shaped rear fender that covers the rear wheel in half, a round bonnet, and a cabin with three windows on one side.
-The front bumper with fog lights and light guards, and the roof escape plate are prepared as separate parts.
-In addition, headlights, door mirrors, and over bumpers on the front bumper are also separate parts.
-A large number of fictional sponsor marks are also set with stickers, and a rally car mood is finished.
[Adopted front wheel drive M-05Ra chassis that can run flat dirt]
-Based on the M-05 chassis that mounts a motor on the front and drives the front wheels, the chassis adopts M-05Ra for flat dirt driving.
-The frame that becomes the framework of the chassis is lightweight, slim and strong, and the resin monocoque type that pursues ease of assembly.
-The suspension is a double wishbone 4-wheel independent with excellent grounding.
-The minimum ground clearance is increased by 5 mm with the hub carrier and the front and rear uprights dedicated to the M-05Ra chassis, and the block wheel is mounted on the dish wheel with a classical design.
-You can enjoy a light run from the pavement to the flat dirt.
-Total length 394 mm, total width 181 mm, total height 165 mm (excluding stack recovery ladder)
-Wheel base 239 mm, front and rear treads 138 mm, tire width / diameter = front and rear 26/60 mm
-Frame = monocoque type
-Drive system = front midship motor · front wheel drive
-Differential gear = 3 bevel
-Steering = 3 split tie rod type
-Suspension = 4 wheels double wishbone
-Damper = friction both before and after
-Gear ratio = 7.25: 1
-Motor = 540 type
-Speed controller = ESC specification (sold separately)
[What to buy separately]
-Fine spec 2.4G electric RC drive set
-4 AA batteries for transmitter
( This is a machine translation. Please allow for possible misinterpretations in the text. )