[Parts that are useful for improving the performance and setting of RC cars]
-Suspension arm with rigidity, geometry and damper mounting method changed to TRF420.
-Rear suspension arm is 0.5mm longer than before.
-Aluminum bush is used to mount the damper, and three types of lever ratios can be selected by replacing the separately sold bush (54942, 54943).
-By offsetting the rear suspension arm 3mm behind, it is possible to shorten the lower deck, and by increasing the rear traction, the sense of stability when driving increases.
-Change the outer pin from Φ2.6mm to Φ3mm on both front and rear to support the load during traveling.
TA07 MS chassis, TA07 PRO chassis
TB-05 PRO chassis
TRF420 chassis, TRF419XR chassis, TRF419X chassis, TRF419 chassis
* TA07 PRO chassis, TA07 MS chassis, TB-05 PRO chassis, TRF419 chassis, TRF419X chassis, TRF419XR chassis
in the case of…
[OP1886 TRF419 Suspension Upgrade Set] Only available for vehicles with TRF419 Suspension Upgrade Set (wheelbase adjustment is required with spacers when replacing rear suspension arms)
( This is a machine translation. Please allow for possible misinterpretations in the text. )