Product Description

-The metal wire is cut straight.
-Nippers for metal wires for models that can be worked up one level!

-Nippers exclusively for metal wires, developed focusing on wire thickness and material often used in model production.
-The cut surface is clean and workability is excellent. We play an active part in various scenes.
-Once used, it is a convenient nipper that you may find indispensable for machining metal wires.
-Since it can be cut without crushing the metal wire, it can be cut and inserted into the hole drilled with the same diameter drill!
-Since the head is small, it is easy to insert into the gap, and it is easy to cut the tension line of the model in the middle! Because it cuts flat, you can easily finish it just by cutting it at the intended place!
-Can cut from metal line 0.02 (Φ0.042mm) to Φ2mm!
-This one can be used for a variety of tasks from detailing up to shaft driving!

-Adopts God Hand's unique cutting technology [Hybrid Edge].
-As seen from the center of the blade, the cutting edge is changed between the tip half and the root half. The tip side specializes in cutting wire rods with a diameter of 0.5 mm or less and the root side with a diameter of 0.5 mm to 2 mm.
-The cutting edge of the target wire is as flat as possible.
-Can be cut with a lighter force compared to nippers of the same size (compared to our company).
-Hand-made one by one by experienced blade sharpeners.

[Quality notation]
-Double-edged nipper for metal wire
-With spring
-Overall length: about 130mm
-Weight: about 65g
-Soft grip
-Blade hardness: HRC56 or more
-With cap
* Specifications are subject to change without notice.

[Notes]
-Do not cut anything other than the target wire.
-Wear safety glasses for safety.
-Make sure that there are no people around and that there are no fragile objects before starting work.
-Do not touch the blade directly.
-Do not overload the capacity. Pay particular attention to the load on the tip.
-To prevent rust, wipe off dirt and fingerprints and apply oil to the shaft and cutting edge.
-Keep in a case out of reach of small children.
-If you touch a metal part with your finger, wipe it clean and apply oil.
-Sebum can cause rust, so be sure to wipe off with a clean cloth.
-Regularly raise rust prevention and lubrication oil such as nipper maintenance oil.
-If lubrication performance deteriorates, rattling will occur and damage may occur.
-Keep cap after use.


Item Size/Weight : 19.2 x 7.7 x 1.5 cm / 88g

Product Specifications

Item code

GH-SWN-125

JAN code

4562349879465

Purchase Information