-Equipped with an indoor light (flickering greatly reduced) function that can be popularly charged.
-We will add a white color located between the existing bluish white and yellowish white.
-The D type is compatible with indoor lights that have a prism attached to the model railroad (KATO type).
-Introducing a room light that does not flicker in vehicles where it is difficult to remove the prism or special types of vehicles.
[Overview]
-This product is a product in which the KATO prism is compatible with special vehicles.
-Double decker vehicle and prism already mounted on the body,
-Also suitable for cases where the prism cannot be removed.
-Use the already mounted prism and replace only the substrate.
-Equipped with energy charger function (Mode S)
[how to use ]
-Mount so that the light source part of the board hits the prism.
[About switches]
-The brightness of this product cannot be switched due to the specifications of the product.
-The setting is similar to the brightness of our product's mode S, which is close to the brightness.
-Since the amount of electricity stored is large, the effect of reducing flicker is great.
[Note]
-Please use this product at 12V or less.
-The function may not be exhibited depending on the usage environment.
-Interior light for N gauge. Usage other than this purpose is strictly prohibited.
-Some vehicles cannot be installed.
-Cannot be installed on tram/car interior lights.
[Package size]
-1 bottle: approx. 27 mm x approx. 100 mm x approx. 17 mm
[set content ]
-2 boards, 4 current collectors
*This product uses an existing prism.
( This is a machine translation. Please allow for possible misinterpretations in the text. )