[Vehicles equipped with a delta-shaped truck unit that you can enjoy driving on rough roads]
-This is an off-road truck electric radio control car assembly kit with a delta (triangular) shaped truck (crawler) unit mounted on the axle instead of the front and rear tires.
-The chassis is based on the shaft drive 4WD TT-02.
-The truck unit uses a resin truck that can be assembled using metal pins, and consists of a sprocket wheel that is connected to the drive shaft to transmit power and eight rollers.
-In addition to its excellent climbing performance with a wider ground contact area than tires, it does not easily get stuck on rough roads such as snowy fields, sandy beaches, and muddy roads, and exhibits stable grip.
-In addition, it is equipped with a polycarbonate chassis cover and front inner fender to improve driving reliability.
-The body is made of polycarbonate, which is the image of a pickup truck from the 1980s.
-The main body is painted black, the window is painted with smoke, and the wheel arch is cut.
-The grill guard equipped with fog lamps and the roll bar are plated parts, and the scale feeling is sufficient.
[TT-02FT chassis with 4 truck units in the spotlight]
-The chassis is based on the shaft drive 4WD TT-02, and adopts the TT-02FT with the front and rear tires changed to truck units.
-The truck unit is attached to the upper and lower suspension arms, and the power of the drive shaft is transmitted to the truck by the sprocket wheel. Eight rollers are placed on the ground plane.
-In addition, it has a swing mechanism, and the third roller can move up and down independently.
-The grounding property is further improved.
-Of course, the extra road clearance by installing the truck unit is also a big attraction on rough roads.
-The truck is made of resin and adopts a connection assembly type using metal pins.
-Compared to rubber, there is less drive loss and smooth running is possible even at low speeds.
-In addition, there are two types of tops (footboards), a flat standard type and a glosser type with protrusions.
-You can select according to the road surface.
-The motor is equipped with a torqueful CR tune as standard equipment to improve the running performance on rough roads.
-Overall length 425mm, total width 247mmm, total height 199mm at the time of completion
-With CR tune motor (35T)
-Power power supply: Tamiya running battery (sold separately)
-RC mechanism used: Tamiya electric RC drive set (sold separately)
-The body has been painted, and the wheel arch has been cut and drilled.
* The photo shows the assembled kit.
( This is a machine translation. Please allow for possible misinterpretations in the text. )