|
No Name
:
2016/11/10 19:51:00
Combiner avec commande 16.1108.2011
|
|
Murphy
:
2016/11/07 10:37:00
|
|
Murphy
:
2016/11/07 10:35:00
|
|
glauco
:
2016/11/01 11:40:00
what Are the Shipping Costs for the " " item, japan to Germany?wolf 1/20
|
|
CJ
:
2016/10/04 5:18:00
I have some items you might be interested in. Your files will not load my pictures. And my descriptions exceed your word limitations. If you're interested please contact by e-mail [email protected]. Thank you.
|
|
DKLC
:
2016/09/05 21:01:00
Just repack old parts in a new box, not 100% same as in chassis 4846.
|
|
Dong
:
2016/08/30 20:36:00
Agree, chassis paint is not easy (especially the 2 black pipes). The others are very good! I like Tamiya Kits
|
|
Johny
:
2016/08/17 16:14:00
It is very good car a get a lot of information from vin-location.com
|
|
Dong
:
2016/08/11 9:34:00
Nissan officially certified. I have to say this one is better than Tamiya, and also cheaper. Only 2 things I want to point out: 1, what a pain to paint such a small GT-R logo. 2, Chrome plate quality is not so good, I have to remove it from the brake discs.
|
|
Dong
:
2016/07/27 9:51:00
Very good kit, very accurate. Only thing I don't like is that the steering arm is too weak (too thin), You may be break it if you use too much force when you fit the wheels. Pitty, I didn't wax my finished one, but it looks all good.
|
|
none
:
2016/07/22 0:36:00
decal is not cartograf. printed in tamiya.
|
|
Brian
:
2016/07/20 16:42:00
Negative: Lot of holes and sink marks Lots of flash Huge bump on driver's seat. Clear parts are rough with mold lines. Fitting issues Parts remain unused for the kit. (50%) No little chef figure that came with the other kits. No plastic injected bowl of ramen included. (Star Kebab kit came with shawarma meat spit.) The bowl of ramen is advertised on the box art Positive: The decals are amazing. Overall: Simple and cute kit. Recommended for fun.
|
|
Pain1917
:
2016/05/28 7:24:00
This is regular model coming from an old mold from mid 70´s. Then a lot of job removing flashes is required. Despite of that fact, it is feasible to get a nice rendering of a race car chassis, interior, engine and whole car. This relaubched model come with a nice booklet showing pictures of the actual car. Wheels are too small to fit on the Goodyear blue streak racing tires and have a wrong patern. actual tires had holes and not the five slots.Efforts allow to get a nice model.
|
|
DKLC
:
2016/05/23 7:57:00
This is not a brand new model kit, very simple so not much fun to build. The purple color on the decal sheet is too dark totally deviated from the real (even with the box art), this is a big turn down of the kit!
|
|
No Name
:
2016/05/07 7:22:00
Very easy to build & fun kit. Multilingual instructions. Waterslide decals. Simplicity = opportunity for customization. I changed the color scheme, & added DIY PE hood grill & side vents, PE wheel pins, brake discs & windshield wiper & Baremetal.
|
|
No Name
:
2016/04/21 4:13:00
i built the street version of this kit
|
|
No Name
:
2016/04/21 4:08:00
|
|
parker
:
2016/03/29 16:22:00
Pretty cool. But the instructions show that it has a motor??? Were the hell is my motor?
|
|
No Name
:
2016/03/21 11:18:00
However, the Audi A4 DTM looks much better than the AMG DTM. The chrome plating was easily rubbed off. The bodywork took a primer, sanding, flat black, sanding, glossy coat, polishing, decals, softener & flat coat. Various metallic colors on the interior & drive train. 2 to 3 times the work of a good car kit, but definitely worth the effort.
|
|
No Name
:
2016/03/21 11:10:00
The AMG Mercedes C-Class DTM 2009 kit was way better than this. Bad fit. Flash & mold lines. Lot of puttying & sanding. Multilingual instructions. Quality pre-cut decals. Step 42 is unclear. The firewall must sit flush with body or the body won't close. I did Baremetal, custom seatbelt, carbon fiber decals, PE windshield wiper & DIY PE front grill.
|
|
No Name
:
2016/03/10 6:45:00
wheels are too small. this is not a well balanced kit
|
|
Porsche 911 GT3R
:
2016/03/08 14:55:00
The kit is awesome. Only missing front wing flaps. Instead of painting the front wing, window frames & side skirts, I applied carbon fiber decals on them. Instead of the 4 chrome-plated hood pins, brake roters & windshield wiper, I used photo-etched ones (ebay). Also, I added a 6-point PE seatbelt + matching decals.
|
|
No Name
:
2016/03/01 0:21:00
This is a kit very simple
|
|
No Name
:
2016/02/29 23:14:00
in my opinion this is not a good kit compared with tamiya. This Is my first Revell kit. doors, boot and bonnet opens
|
|
Lancia 037
:
2016/02/29 14:48:00
|
|
Lancia 037
:
2016/02/29 14:47:00
The visual aesthetics of this cheap & simple kit are fantastic. Quality parts in white, black & clear. Accurate decals. Rub-on tire markings. Metal antenna. Soft rear mud flaps. 2 sets of driver decals. You want #1 Markku Alén & Ilkka Kivimäki who won the rally. Full engine. The only gripe is the missing foot pedals which I scratch-built. Add some PE hood pins, wires/hoses & screws.
|
|
No Name
:
2016/02/29 3:25:00
|
|
hector
:
2016/02/20 23:40:00
|
|
YZF750
:
2016/02/20 10:15:00
Out of the box, the kit is meticulously detailed to the point that even the brake discs holes were factory-drilled. Parts in gray, white, black & clear. Black & clear pipings. Some parts too fragile. Minor mold lines. Tension spring for rear suspension. No screws, nuts & bolts, but a few brass rods for the wheel axises & swing arm (rear fork). Waterslide decals too easy to break. Multi-langual instructions. Good packaging. No part trees scratching against each other.
|
|
No Name
:
2016/02/13 12:39:00
As mentioned previously, I bought Crazy Modeler's seatbelt kit. Backside is adhesive. I used the bundled Fujimi photo etched buckles & their instructions. You'd need a magnifier & 2 pairs of tweezers. The seat can slide out of the roll cage & in after seatbelt install, then glued back on.
|
|
Dancraft
:
2016/02/03 17:59:00
The Bike looks good, especially the Photo etched wheel spokes..... but where is the chain Fujimi?
|
|
DKLC
:
2015/12/27 23:53:00
Pros: - parts fit precisely, thumbs up; - detail parts (eg. door handles, upper/lower door panel) are separately molded for easy painting. Cons: - no engine compartment detail (at this price, it should have more detail than just curbside); - optional car top is not included; - should add thickness to the A pillar for a topless car with no optional car top; - no license number plate decal provided; - I doubt the driver figure is most of the modelers longing for
|
|
No Name
:
2015/12/24 10:46:00
It looks like Fujimi Mokei is setting the trends: licensed race cars kits & half exposed engines. The actual 6-speed 493 bhp MP4-12C GT3 race car was in 2013 SUPER GT in the GT300 class. Japanese & English instructions. English color chart. The last color 92 is semi glossy black. Parts molded in clear, white & black. Quality waterslide decals. Photo etched parts. No cloth seatbelts. Metal antennas. No decals for dashboard. The body color is metallic purple.
|
|
No Name
:
2015/12/24 10:07:00
Revell 1:24 Scale Mercedes C-Klasse DTM '09 Paffett. Deutsche Tourenwagen Masters. German touring. The kit is probably the highest quality Revell race car kit. Not very complicated, but enough to show modern engineering. Each tree in a separate bag. No scratching. Multilingual instructions. Minor mold lines, as with every Revell kit. Quality pre-cut decals. The rear fenders were too tight. The bond between the interior & chassis is too loose. The bonnet/hood install was too hard.
|
|
No Name
:
2015/12/23 0:02:00
|
|
No Name
:
2015/11/25 8:23:00
Latest project completed. Tamiya 1/12 2006 MotoGP Kawasaki Ninja ZX-RR. #56 Shinya Nakano. Priming, airbrushing, sealing x 2, handbrushing, decals, decal softener, top coating, gold BareMetal on bottom of front fork & silver BareMetal on rear brake disc. Only grip is the black kinking piping/tubing. 1 of the best 1/12 bike kits.
|
|
No Name
:
2015/11/01 13:28:58
The kit is great but the twin turbo is not that good
|
|
pain1917
:
2015/10/13 2:30:59
It is a mix of a very easy to assembly model, good quality but unfortunately there are no moveable panels that allow to show both engines, the electrical one and the gasoline one. Gasoline engine is a very nice rendering of the actual thing with the unusual inverted intake and exhaust layout. Electrical engine is very simple. Stronger part of the kit are interior. It is a good kit that properly work can give a great model.
|
|
'Olesmoothie'
:
2015/10/06 9:07:46
I 1st stumbled onto the Fujimi Enthusiast Series of kits by accident. Once I got the kit home and looked inside the box I was HOOKED!!!! I had to own every kit in the series and in fact over time purchased all of them released in the 80's~90's. In my opinion the 288 GTO is the best looking Ferrari to hit the streets, and this kit captures it's curves accurately. BUT it is a challenge to build but very rewarding when finished right. I spent over 750 hours and 18 months on mine.
|
|
nugundam93
:
2015/10/06 2:59:06
not sure if i got a lemon kit but both the taillamps and headlamps, when fitted, left about close to a 1mm gap between the center of the trunk and front grille respectively. rims are also not accurate.
|
|
nugundam93
:
2015/10/06 2:54:54
decals are a bit thick and they are needed to replicate the advan livery, unless you mask it instead. this is a roadgoing version with the advan decals, unlike the actual racecar with a stripped and caged interior.
|
|
nugundam93
:
2015/10/06 2:52:54
rims included in this kit is not the same as the one on the box cover photo. this is also just a roadgoing version (with complete interior), unlike the actual car which has a stripped interiror and rollcage.
|
|
No Name
:
2015/09/23 2:40:00
Forgot to close the seat cowl.
|
|
No Name
:
2015/09/21 3:13:46
This is Ver Utawarerumono. This model bike was engineered & manufactured most accurately & priced very reasonably by Tamiya. The whole building experience was enjoyable. I built this kit a while back, recently dissembled it, sanded the paints off, repainted & sealed everything except the main frame, part of front fork, headlight & windshield, primed, airbrushed, panel-lined, sealed, applied optional decals & decal solution, sealed again the upper & seat cowls, fenders & fairings.
|
|
No Name
:
2015/09/06 8:36:43
Simple box art. Monochrome Japanese & English instructions & color chart. Huge decal sheet & application instructions. Parts in clear, white, black & chrome-plated colors. Minor mold lines. The white body's surface was exceptionally smooth & glossy white. The white panels with the car number behind the front wheels are separate. Minimal masking. No opening bonnet or engine. Bonnect & door vents are supposed to be black. No window masking decals.
|
|
Ai
:
2015/09/04 15:39:05
|
|
No Name
:
2015/08/30 4:32:01
This is the Heller version, improvised to Ver Toradora. Both the Tamiya & Heller versions are the same bike. Tamiya wins hands down. I used putty to fill seams & air bubbles, sanded, primed, airbrushed, touched up, panel-lined, sealed, applied decals, decal solution & softener to, & sealed the kit.
|
|
DKLC
:
2015/08/25 20:59:00
Overall very good in qulaity, however the bodyline decals is quite hard to apply
|
|
DKLC
:
2015/08/25 20:50:45
Haven't start building this kit, but by the glance of the parts I spotted the followings 1. Engine is part of the build in this kit, but the hood cannot be opened. 2. Panel lines are soft. 3. Never see any kits where front bumper is made of brittle clear part. If you want to build a more decent 1:24 240Z model, I believe Hasegawa is a better choice than Fujimi despite it has no engine detail.
|
|
No Name
:
2015/08/25 6:24:47
The Tamiya version is better in every department except that the Heller kit has a one-piece fairing & fuel-tank-seat-and-tail part & a racing figure with decals. Mold lines everywhere. Fitments weren't good. Decals were too soft & curled up as soon as they left the backing paper. I used putty to fill seams & air bubbles, sanded a lot, primed, airbrushed, touched up, panel-lined, sealed, applied decals, decal solution & softener to, sealed, weathered with Tamiya & sealed the kit.
|
|
No Name
:
2015/08/20 1:06:05
Nice kit but the decals are missing the 3 color stripes that are on both sides the roof over the side glasses.
|
|
No Name
:
2015/08/10 6:39:17
The Tamiya version is better than this one. This kit isn't very detailed. The decals were too thick so they wouldn't stick. Decal softener helped a bit. Had to glue the white strips. Body wouldn't sit flush with chassis. Had to epoxy. The fog lights are too ugly. I changed the colors.
|
|
Pain1917
:
2015/07/28 1:51:49
Side skirts are fit in the air at the extremes. Front and rear bumper fascias fitting can be improved mainly the alignment with the body. Interior looks great specially the fact to build it RHD or LHD. Wheels and tires are beautiful. What I really dislike are those dark smoked glasses for the rear doors quarters and rear hatch they are hiding the beautiful interior. A light smoke color would be enough.
|
|
Pain1917
:
2015/07/16 2:45:07
In the age that Fujimi release for the first time this product they launched several charm products. I looks actually as a auto shop.
|
|
pain1917
:
2015/07/15 6:51:39
Model come from an old tool, actually show the age. Body is a nice rendering. Weakest parts are the racing chassis and instructions sheet. Instructions are not clear when call some of the parts or to indicate assembly position. Wheel base can be adjusted gluing the two halfs in different position, instructions are not clear.Model required more than 80 hrs. to be completed, mainly deburring flashes . Chromed parts have a heavy build up of the clear coat. The final result: Just acceptable.
|
|
chocolatecheesecake
:
2015/07/01 9:21:44
@Dfran8: the body is white, you can check the content in the product photo section.
|
|
Dfran8
:
2015/06/30 21:46:12
I want to ask, if the bike comes in red, or do we have to paint it? thanks
|
|
андрей
:
2015/06/24 19:23:55
здравствуйте ! хотел узнать когда появится в продаже модель toyota town ace noah ?
|
|
No Name
:
2015/06/22 22:41:08
|
|
No Name
:
2015/06/11 11:53:00
It’s my latest Revell 1:24 Formula One kit. Red Bull Racing RB8 Sebastian Vettel. 2012 season. Germany Vettel version. I sanded, primed, airbrushed, sealed, applied decals & decal set to, applied Bare Metal to mirrors, touched up & sealed the kit.
|
|
Isma
:
2015/05/24 8:09:31
Greetings Is this a ready made fixed model??
|
|
No Name
:
2015/05/08 6:57:29
Although comes from an old tool the product can be completed as a nice rendering of this representative Porsche car. Although roll cage looks a Little bit underscale is a nice representation of this feature. Dashboard, driver sear and chassis require some job but final result worth it. The weakest part from my personal point of view are the tires.
|
|
Ronny
:
2015/05/01 22:48:35
Excellent fit and finish although my hood wouldn't sit straight. The hood is fragile. It cracked while i tried straightening it. So i had to rebuild one. But other than that, kit is excellent value for money with added benefit of it having an engine.
|
|
JJ
:
2015/04/26 0:53:34
Have been stuck with this kit for quite some time. Instructions, I think are not the updated version some help with that would be great. Thanks
|
|
Hien
:
2015/03/05 10:27:08
Porsche 928S Motorized by Tamiya (1/20) built by Henry Vu in December 2014.
|
|
chocolatecheesecake
:
2015/01/26 9:49:47
@oldtoni: hey dude, this isn't a place to make requests for your orders. You should contact the HS staff directly by email for order request.
|
|
oldtoni
:
2015/01/25 12:05:42
I would buy also De Tomaso Pantera GTS (Model Car), you can add this item to [Order No.] 15-0123-1448? thank you
|
|
that+annoying+blonde
:
2015/01/04 6:41:13
if you know about it, can you post?
|
|
that annoying blonde
:
2015/01/04 6:40:04
it was fun to put together, even though i have a piece that has no number and the instructions have to pictures of it even though it i there
|
|
Mosab
:
2014/12/14 8:41:47
|
|
No Name
:
2014/12/11 10:49:05
The kit is a 1/24 scale of the 2010 Formula One season race car. Excellent box art. Very clear instructions. The body mold lines were wet sanded away. The antenna in front of cockpit was scratch-built. The tires were sanded to a worn look. Plenty of carbon-fibre decals on the chassis, suspensions, and cockpit. A few version. My photos show the Fernando Alonso.
|
|
pain1917
:
2014/12/08 9:24:42
This is nice rendering of the 911 turbo, Some minor details in the engine that can be fixed to provide a good looking one. Rear suspension is a weak one since the control arms look smaller than they must appear. Body is a well proportioned one and from my personal point of view this kit has the most beautiful rendering of the front seats. Rest of the parts looks accurate giving a nice model as a final results. probably the weakest parts are wheels and tires.
|
|
No Name
:
2014/12/01 11:21:48
The CLK-GTR is a scaled down recreation of the actual FIA GT race car. The V12 engine, radiator, drive train, Le Mans cockpit, suspensions, wheels, etc. are intact. Excellent box art. Clear multilingual instructions. Abundant decals. The kit in my photo was a full view version with a see-through chassis.
|
|
No Name
:
2014/11/26 1:02:38
This kit is a faithful reproduction of the Honda F1 RA272. Excellent box art as usual. Clear instructions. 2 versions. 11 & 12. Minimal decals. Simple, yet accurate interior. Detachable front & rear covers. Clear rear cover. No driver. Factory-painted tire letterings. Overall, an eye-catching Tamiya kit.
|
|
No Name
:
2014/11/24 8:48:49
The Yamaha Virago from Tamiya is a quality scale model. The box art is excellent. From the V-twin engine, head & signal lights, suspensions, exhaust, seat, rims to tires, the cruiser is as detailed as the scale allows. The instructions are clear to foreigners. The whole model was hand painted. Tamiya kits don't need any modifications to look good.
|
|
No Name
:
2014/11/19 23:55:50
Tamiya is no stranger to vehicle & military scale modelers. The race car kit was a quality build. From bodywork, interior, rear engine to detachable engine cover, everything was detailed as highly as possible. The large body decals hid the paint lines perfectly. Just mask along the raised lines on the body before spray painting. Bare Metal foil was used to cover all rims. Check out the photo of the real machine at wikipedia.
|
|
and300zx
:
2014/10/27 10:49:34
Great kit, excelent value for money, very well done body and chasis and a very decent amount of parts.
|
|
Genji92
:
2014/09/18 23:46:31
Very nice model! I had a lot of fun building this one (:
|
|
Genji92
:
2014/09/18 23:42:23
I bought this model for my girlfriend because she loves Trabants but I had a hard time putting it all together. Some of the parts looked different on the manual, that was the most frustrating part, also some of them just didn't seem to fit together, but most of it was alright. Definitely not as good as the Tamiya models.
|
|
Genji92
:
2014/09/18 23:40:10
This model looks just like the real thing but I had a hard time building it. Some of the parts looked different on the manual, some of them didn't fit properly but most of all the front wheels don't fit at all, so I had to glue them to keep them in place.
|
|
Anon
:
2014/08/11 22:37:50
What's the difference between this and the Fuji Rd.2 Winner ver.?
|
|
cri
:
2014/04/20 0:48:38
I noticed that although the kit comes with two different set of rims, none is the one pictured in the box
|
|
cri
:
2014/04/12 19:25:59
Nice kit accurately molded and very detailed. It comes with many choices: - 2 sets of different rims - 3 choices for rearview mirrors - 2 types of rear spoiler
|
|
pain1917
:
2014/04/03 6:43:12
This new series of wheels are a complete deception. The are not even close to be a model accesory, they look more like a fantasy toy. Unfortunately is more expensive send them back to Japan than through them away
|
|
No Name
:
2014/03/07 18:25:42
|
|
mouse
:
2014/02/12 5:39:41
These are fantastic kits, here are 3 of them, and still a couple more I intend to buy. I love the challenge, less paint mess, and they turn out fantastic! check 'em out
|
|
No Name
:
2014/01/17 9:10:28
Builds into a very nice model. Easy kit to assemble and paint, highly recommended..
|
|
sulin
:
2013/12/17 2:47:26
what the body colour? pure white or racing white?
|
|
No Name
:
2013/09/23 23:13:13
One of the most beutiful models from Fujimi. Despite of its curbside condition the model shows a great underfloor detail good enough to compite with more intrincate models. But what is actually the nicest part of the car are those beutiful door panels and the body. Both replicate in al detail the actual car.
|
|
Pain1917
:
2013/09/18 7:49:47
Model quality is really poor. First issue just had a revised version of the body but used the chassis/interior of the F348 model which had an accepatable interior with separate door panels. Revised version is really UGLY. very bad quality do not match with the traditional quality of a Japanese product. I found toys with better appearance than this supposed to be an accurate model.
|
|
sandcrab
:
2013/08/11 9:45:11
awesome kits, looking to purchase another
|
|
GeeTee66
:
2013/07/29 20:34:21
Excellent chrome Tyre tread pattern is very good with only tiny seams which can be easily removed. Sidewall lettering is true-to-scale and very crisp. The addition of the scooter is a bit of fun, too!
|
|
omeser
:
2013/07/29 2:47:20
Why you posted a picture with work meister . and sell packs with that sh...?!
|
|
Chrisswiss
:
2013/07/25 4:05:59
For me one of the top kits of Tamyia; very detailed, even fork in iron parts available. You can build Randy de Puniets or Shinya Nakanos bike. Nakano was second in Assen June 24, 2006 between Hayden and Pedrosa (both on Repsol Honda; Tamyia Kit No. 106)
|
|
Chrisswiss
:
2013/07/25 3:50:56
Aoshima were the only ones who offered decent H-D models in a time when the Harley Davidson Company let only Franklin Mint reproduce their bikes. Now Tamiya has started to make their models again, but the Aoshima range is still great! The models are easy to build and look very realistic.
|
|
No Name
:
2013/07/20 4:19:54
here's my harley police bike along with the suzuki I bought. these kits were awesome to build and looking to build more.
|
|
ray886
:
2013/05/27 1:52:35
Car height needs little bit lower......
|
|
ray886
:
2013/05/27 1:45:34
Chassis coloring work is not easy........
|
|
ray886
:
2013/05/27 1:40:46
Cockpit is nightmare........
|
|
Chrisswiss
:
2013/05/09 20:45:55
Very beautiful and rewarding model, shows the engine perfectly, the predecessor of today's Dynas.
|