- Is [double track plate ground station building] accessories you want to use in the near form the ground station building. Such as counter-type home for overhead line Column station name plate Bench streetlights planter Post, the layout of peripheral station has become indispensable props set.
[Please note]
- Parts, etc. nipper or cutter knife, please carefully separated from the runner.
- The adhesion of the parts to each other, please use the adhesive for a commercially available plastic model.
- If you want to paint, depending on your preference, please use the paint for commercial plastic model. In this case, please provide a sufficient ventilation according to the instructions of the paint.
- Such as children the small parts like which is not swallowed or put in the mouth, please note.
[Parts Content]
- Sealing bench
- Station name plate for a seal
- Planter
- Station name plate
- Streetlights
- Bench
- Face type home for the overhead line pole
※ Seal, please cut on the inside full of frame.
※ During the separation of the parts, please be careful not to damage the figure hatching part.
Please note that as a fluorescent lamp is not cut because it is mold on the counter-type home for overhead wires pillar ※.
Streetlights and the counter-type home for catenary pillars ※ is a fixed by the plug if you want to re-housed, please state that can be removed.
※ For the installation, please refer to the photograph that has been described in the package of double track plate ground station building (part number 23-126) and double track plate facing formula home set (part number 23-127) as a reference.
※ station name plate, bench Please be fixed using an adhesive from the sticker.
※ planter, please fixed by, for example, adhere to any position.
- Age: 8 years of age or older.
( This is a machine translation. Please allow for possible misinterpretations in the text. )