(Z) Classic Track (Wooden Disign Tie) Curved Track R195mm 30degrees (6pcs.) (Model Train) - HobbySearch Model Train HO/Z Store

This item is limited to 50 per household.

● 30 ° rail will be added to the lineup.
● 6.5mm orbit spacing of rails with ballast
● The metal parts such as rail, use the (nickel silver) white wood as excellent conductivity.
(Stainless steel part)
● joint connecting the ballast to each other, the expression is also another part to be replaced immediately if damaged.
● custom specification stuck to U-shaped rail, "picture" is a cross-sectional shape of the metal rails.
● Z gauge rail if you have made a great layout, because the electrical resistance of the rail is fine
You may run into the distance from the vehicle power supply unit would have to speed down. This can only be
To reduce, increase in a range that does not lose the real cross-sectional area of ​​the rail, as much as possible the electrical resistance
We have low.
● Since the power sources are provided in straight rail, by supplying power to several places, uniform vehicle speed
Is possible.
● The power supply unit because the cover is attached, if you do not want to feed with a cover appearance by placing
You can so as not to cause a loss.
● In order to improve the grip of the wheels with rubber tires, to spread a bit of tire tread of the rail
We have designed.
● Start from classic track-style wooden sleepers also matches the old vehicles, concrete sleepers wind
We plan to track PC lineup.

Item Size/Weight : 23.2 x 8 x 2 cm / 47g