This item is limited to 24 per household.
- New release cab back parts for various locomotive! !
- Locomotive who are leading the various train, to a variety of activity.
- Indoor cab back parts to reproduce the brave figure more feeling basis will be released new.
- Installation is quite easy.
- You can reproduce the back equipment as seen from the front just stick to the light-shielding parts.
- Parts and has been cut by a laser, we are easy to paste.
- Please make the means your existing grade up of the vehicle.
- Contents: EF64-1000 machine room-cab, EF81 cab
- Are bonded Tsukekata:
(1) Remove the cab of parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) I will return the beam finished parts to the original position. You are able to make classification at the 1-position side and the second place side, please be careful to mounting. (EF64-1000 roof superfine monitor side ranked first side, EF81 is more high-voltage line is short first place side)
(4) to EF64-1000 there is a machine room representation. Please paste to the side of the power unit.
(5) This is a complete re-assembled to restore.
- Use Material: resin adhesive sheet
※ We produced a vehicle to reference but there is a part that is different from the actual vehicle.
( This is a machine translation. Please allow for possible misinterpretations in the text. )