- it will be limited release the band parts of the features a lounge car-Okha 24-700. It must have the body of work by the user like, but reproduce the band is the biggest concern in the cutting sheet. Mark Inreta and also included. Because it is a limited production Do not miss this opportunity.
- Our products are affixed to the body of the off-the-shelf, is a film seal in order to reproduce the lounge car. Mark Inreta also included. Paste of the band, takes the technology to paste Inreta. It is better for goods you have the processing technology.
[Contents]
- lounge car band seal 1 bisect (with spare one minute)
- Li tack sheet three marks Inreta (with spare)
[How to paste]
(1) Remove the base of the dust, dirt and oil.
(2) Peel off the periphery of the band from the base. (Peeled off even in the upper band)
(3) attaching the re tack sheet band portion of the side fraction, to transfer. (Please rubbed the band portion from the top of the re-tack sheet to strengthen order to pressure-sensitive adhesive.)
(4) pasted after the positioning of the vehicle body.
(5) pressed lightly band portion from the top of the re tack sheet or the like burnisher.
(6) After confirming that the strip of the top and bottom are not bent, cut the excess with a cutter. (Be careful not to damage the body, such as the underlying)
(7) When the paste immediately after put into the case, such as the band is deviated. Please houses from the warmer about half a day.
(8) to paste the mark Inreta at a predetermined position. (Reference position is the accompanying figures)
[Handling Precautions]
- Make sure that there is no oil in the Paste the object at the time of processing.
- The car ends such as curve part, please put and rub the curve.
- After pasting Please houses from at the time.
- the responsibility of the damage or the like in the processing can not assume.
[Material]
- Polyethylene terephthalate + aluminized
( This is a machine translation. Please allow for possible misinterpretations in the text. )