This item is limited to 3 per household.
[Major features]
-1/35 scale reproduction of WWII German III tank J
-2 in 1 kit that can be assembled by selecting either very early production type or initial production type
-Initial production type is set with both a short caliber 42 caliber gun and a long caliber 60 caliber can be selected and assembled
-The lower part of the body is an integrated part using a slide mold
-Detail on the bottom and side of the chassis is reproduced in detail, including after welding.
-Adopting a prefabricated magic track for the track
-The upper part of the car body reproduces the inspection hatch of the engine deck with different parts
-Accurately model different hatch shapes for extreme initial type and initial production type
-The space armor at the top of the car body has a three-dimensional finish
-Firmly model the turret space armor
-Accurately reproduce each type of difference among the initial type III tanks
[When you ’re in the car]
-In World War II, the German Army was first developed and equipped as an anti-tank vehicle by the III tank.
-The first type, A, appeared in 1937, and then played a part in the main battle tank with various improvements until the middle of the war.
-Among the many types made, the J type was produced from 1941.
-The car body had a front armor plate that was 50mm thick, and the rear engine deck had a newly designed car body.
-At first, Hitler instructed to install a 5cm long gun barrel for the main gun, but the site ignored it in consideration of productivity.
-Production started with the KwK38L42 42cm caliber 5cm tank gun.
-Hitler became aware of this, and suddenly developed a 60cm caliber 5cm tank gun KwK39L60.
-Type J is now divided into a 42 caliber gun mounted type and a 60 caliber gun mounted type.
-1549 and 1067 were produced, respectively.
[About the model]
-The model is a plastic model assembly kit that reproduces German Army III tank type J of World War II on 1/35 scale.
-It is a 2 in 1 kit that can be assembled by selecting either a type equipped with a 42 caliber gun of the very early production type and an early production type or a type equipped with a 60 caliber gun.
-The lower part of the body is an integral part using a slide mold.
-Detail on the bottom and side of the chassis has been reproduced in detail, including after welding.
-Adopted a prefabricated magic track for the track.
-Produce realistic finish from your feet.
-The upper part of the car body reproduces the inspection deck of the engine deck with different parts.
-Hatch shapes that are different between the very initial type and the initial production type are accurately modeled.
-And the space armor at the top of the car body has a three-dimensional finish.
-The turret space armor is also well modeled.
-The barrel is a short barrel 42 caliber gun and a long barrel 60 caliber set.
-Accurately reproduce each type of difference among the initial type III tanks.
-This is a kit that can be used to create a wide range of scenes.
( This is a machine translation. Please allow for possible misinterpretations in the text. )