* Price, product number, JAN code changed product
[About the prototype]
――This product has commercialized a group modified from Waki 10000 out of Waki 8000 that supports small pallet luggage.
――In consideration of mixing with passenger cars, it is divided into 8750-8792 with a steam heating pipe and 8950-8965 with an electric heating lead wire, and the body length is shorter than the Suni 40 by handling the A pallet. increase.
――It was used by luggage trains nationwide until 1986, but it was not taken over after privatization.
[Product Features]
-We have accurately reproduced the difference in overall length, which is a big difference between the two cars.
――The armpit 8000 in the era of only A pallet is short, and the total length of Suni 40 after the establishment of B pallet is long.
――Both were used by luggage trains nationwide until 1986 (the Suni 40 has restrictions because it is not equipped with a ferry), and it was not continued to be enrolled after privatization.
――We played an active part in the glamorous era of luggage trains in the 1950s with our already released Mani 44, Mani 50 made by other companies, Oyu 10, Oyu 12, Suyu 13, Mani 30-2008 and so on. In terms of operation, many two-car trains were seen in the built-in formation.
--In contrast to the Suni 40, which was originally treated as a passenger car, the Waki 8000 is a modified version of the new Waki 8000 for passenger vehicles and the Waki 10000 freight car, and the appearance is different. We have commercialized it as a mold.
――In addition to the total length, there are changes on the sides, and the notation method is different. Although it is a slight difference, there are many noticeable differences between the two.
――In addition, Suni 40 is almost the same as the postal car Suyu 44, and it is also possible to produce it as Suyu 44 with light processing.
――The side doors are all painted with aluminum silver, and the others are blue No. 15. Later, the Waki 8000 replaced the dolly with the Kokifu 50000, but not all cars were remodeled.
[Assembly]
――Separate from the runner according to the instruction manual and assemble each. Depending on the part, there are places where the gate protrudes and parting lines, so please finish it carefully.
--There is no part number, so please refer to the illustrations and details when assembling.
--For weights and wheels, use other companies' products or kit manufacturer's general-purpose products.
--When using a coupler made by another company, use the recommended coupler KADEE # 153 or a coupler that fits in the coupler pocket. The selection range is expanded by partial processing.
--Target age: 13 years old and over
( This is a machine translation. Please allow for possible misinterpretations in the text. )