* This item cannot be canceled.
──Reproduce the DF200-0, which features a red skirt, as a prestige model!
- The DF200 type is an electric diesel locomotive developed by JR Freight, and a prototype appeared in 1992.
- When the 9th model of the 0th generation appeared, the skirt was red and the JRF mark on the side was reddish-purple.
- From No. 10 onwards, the skirt was gray and the JRF mark on the side was white, but now all No. 0 models have red skirts and white JRF marks.
- The 0th generation has been consistently active in Hokkaido since its appearance.
[Actual vehicle guide]
- The DF200 type is an electric diesel locomotive developed by JR Freight, and a prototype appeared in 1992.
- Since its introduction, it has been mainly used for transporting cargo within Hokkaido, but from 2016, some of the 100s were transferred to Honshu, and at the same time they were converted to the 200s.
- All 200s belong to the Aichi Engine District and are mainly active on the Kansai Main Line.
- When the 9th model of the 0th generation appeared, the skirt was red and the JRF mark on the side was reddish-purple.
- From No. 10 onwards, the skirt was gray and the JRF mark on the side was white, but now all No. 0 models have red skirts and white JRF marks.
- The 0th generation has been consistently active in Hokkaido since its appearance.
[point]
- Reproduction of the 200s underfloor equipment with new production
[Product features]
- [RED BEAR] logo is printed
- Reproduce the [JR FREIGHT] mark under the side window on the driver's side
- Car number can be selected and metal transfer sheet included
- Manufacturing nameplate and vehicle markings are reproduced by printing
- Headlights are lit by bulb-colored LEDs
- Coupler uses KAD-No.5
- Equipped with energizing terminal
- Minimum radius R600 possible (excluding S-shape alignment)
[About <HO-242>]
- Reproduced No. 0 manufactured from 1994
- [JRF] mark on the side of the vehicle is printed in white
- Skirt is reproduced in red
- Comes with license plate and transfer sheet base by photo-etching plate
- The ward name tag is printed with [5] [coins]
- The following parts will be installed with metal>
・Various handrails
・Wiper
・Release lever
・Signal flame tube
・Air hose
- The following parts are planned to have plastic parts installed
・Dolly step
·whistle
[Features]
- Reproduced No. 0 manufactured from 1994
- [JRF] mark on the side of the vehicle is printed in white
- [RED BEAR] logo is printed
- Skirt is reproduced in red
- Reproduce the [JR FREIGHT] mark under the side window on the driver's side
- Car number can be selected and metal transfer sheet included
- The ward name tag is printed with [5] [coins]
- Manufacturing nameplate and vehicle markings are reproduced by printing
- Headlights are lit by bulb-colored LEDs
- The coupler uses KAD-No.5
- Equipped with energizing terminal
- Minimum radius R600 possible (excluding S-shape alignment)
- <The following parts will be installed with metal>
・Various handrails, wipers, release levers, signal flares, air hoses
- <The following parts are scheduled to have plastic parts installed>
・Dolly step ・Whistle
[set content]
- DF200-0 (Prestige model)
[accessories]
- Runner parts: License plate base (for front)
- Runner parts: License plate base (for side)
- Runner parts: License plate (for front)
- Runner parts: License plate (for side)
- Parts: Roof removal jig
- Transfer sheet (metal): Car number
- JR Freight Approved
( This is a machine translation. Please allow for possible misinterpretations in the text. )