1/80(HO) J.R. Kyushu Series 811-2000 Paper Kit (4-Car Set) (Pre-Colored Kit) (Model Train) - HobbySearch Model Train HO/Z Store

* Hurry! This item is almost sold out!

* This item cannot be canceled.

This item is limited to 1 per household.

Copyright Kyushu Railway Company

[ Related Products ]
- 1/80(HO) MP Gear for Electric Car A-3 WB26 10.5 Plate Wheel Black
- 1/80(HO) MP Giar with Wheels (for Electric Car A) (WB26.0mm Plate dia 10.5 Wheel) (for 1-Car)
- 1/80(HO) Canon Motor EN-22 (General, Both Axes)
- 1/80(HO) Canon Motor EN-22 (General, Both Axes/Short Axes)
- 1/80(HO) MP Weight A for Electric Car
- 1/80(HO) Universal Joint D=2.0~2.0 (Power Transmission Parts) (2-pair)
- 1/80(HO) Universal Joint < Type 2 > D=2.0~2.0 (Power Transmission Parts) (2-pair)
- 1/80(HO) Motor Holder CD Set for EN-22 (for EC.DC) (1 Pair)
- 1/80(HO) Bogie Type DT-50 (Plain) (2pcs.)
- 1/80(HO) Bogie Type DT-50 (Pivot) (2pcs.)
- 1/80(HO) Center Pin for Wooden Floor Board (Chassis) for 1-Car(2pair)
- 1/80(HO) Endo Tight Lock Coupler (2pcs.)
- 1/80(HO) Draw Bar (20 Pieces)
- 1/80(HO) Draw Bar (4 Pieces)
- 1/80(HO) Endo Tight Lock Coupler Base (10pcs.)
- 1/80 Pantograph Type PT71 Single Horn (Silver) (1pc.)
- 1/80 Pantograph Type PT71 Single Horn (Gray) (1pc.)

- Side parts painted and printed!

[overview]
- This is a paper car body kit that has been cut using laser processing. Although it is a simple kit, it reproduces even the finest details.
- Kit contents:
・Paper parts for the body and underfloor equipment (simplified representation)
・Acrylic parts such as lights, window glass, floorboards, etc.
・Front 3D printed parts etc.
*The parts other than the sides are unpainted. Painting is required after assembly.

[Product Guide]
- The main parts of the product are made of laser-processed paper, the front is 3D printed, and the floorboard is made of acrylic.
- Since the floor plate is also included, it can be produced relatively easily if you purchase the recommended trolley and power separately.
- The side parts are painted and printed for easy assembly.
- The 811 series 2000 series is a vehicle that has been updated with various parts of the 0 series.
- Initially, it was completed as the 1500 series, but due to the addition of wheelchair space to each vehicle, a new 500 was added, making it the 2000 series.

[Features]
- Side parts are painted and printed. *Painting is required for the front, roof, etc.
- Comes with a specially designed floorboard. If you prepare the recommended trolley, power, etc., you can make it run without complicated processing. (Powered by coreless power truck)
- 3D printed parts are included for the front, skirt, insulators on the roof, etc.

- Vehicle body: made of paper
- Front: Resin (3D printing)
- Glass etc.: Made of acrylic

*In addition to this kit, a trolley, power unit, pantograph, etc. are required.

[Separately prepared items]
- Power: MP gear A for electric trains, EN22 motor general use double shaft, MP weight A (2 pieces), universal joint φ2.0-φ2.0, motor holder C/D set (all made by Pea)
- Dolly: Nikko Model Dolly DT50, center pin for Nikko Model wooden floorboards
- Coupler: Pea coupler or Pea drawbar, Pea coupler mounting seat, or IMON coupler
- Pantograph: Substitute with IMON PT71 (1 horn) etc.
*The floorboard is designed with the above trolley and coupler. If you use other trolleys or couplers, please devise your own ideas.

- Approved by JR Kyushu

Item Size/Weight : 30.6 x 22.9 x 5.4 cm / 566g