This item is limited to 3 per household.
- Main line.
- What side destination indicator becomes closer to the center door, accent became orange base.
- And McTc of ,817-0, with x2 + x2 Tsumaita KUHA roof and injection molding the side of the left and right as shared intermediate wheel
Top car will be cutting and patching required of the cab portion, and kit high degree of difficulty somewhat.
- End car so are concentrated in the center only non-Panta side, side window of the middle car, to guide the steps of the back
(here in plastic board appropriate) that near the center can expand, car end pro-fill, must also filled window of WC unit.
- It becomes the joint and also shut off middle car roof. Skirt round hole also unnecessary.
- Decal attached, on the roof equipment to ride in the middle Moha is white metal casting.
- Because it is cutting and patching required, draining representation of the customer door on joint trace of finish (surface, it has not been to weaken
In order to disturbing.
- (No wife face duct-like projection of Tc Yes WC) connecting surface and under-floor equipment is also different.
- I include a reinforcing plate on the front under the window, also brass material connecting surface through the door of all cars.
- The distribution of minutes in the special event, [817-0 for] only comes with front and not the 817-1100 for the (in stock
Convenience). And cutting and patching processing, modification tools of car window end of the intermediate Mohd if possible person, the front
You also manage to work to show a large display type, such as 1100 die number to fill the dent of direction curtain section,
Because I put the (decal, Stacking paste the cell window glass parts of representation on it and yet determined to
Hard to be outstanding).
- Which had been accidentally description of priority seating stickers position of 817-3000.
Correctly
[Any side, (the end of the window of no better destination indicator) is in the door pocket position to the right of the center door as seen from the outside]
KUHA 817-3000 Moji closer, WC Yu KUHA 816-3000 Omuta closer without WC.
- Is required separately truck weight, power, Panta, and cell window.
[Summary]
- N gauge body unpainted Purakitto.
- Required joint body cut.
- High degree of difficulty.
[In this article other than commercially available separately necessary for the completion]
- Truck DT50 (DT56)
- 20m class power unit
- AC Single Arm Pantograph
- Tools, such as paint
- For the sides window cell, iron weights (weight)
※ Please refer to other instructions.
- Relationship contact each place already.
( This is a machine translation. Please allow for possible misinterpretations in the text. )