Simple Shuttle Drive Timer (for Kato) (Model Train) - HobbySearch Model Train N Store

This item is limited to 12 per household.

[ Related Products ]
- Simple Shuttle Drive Timer (for Tomix)
- Diode w/Clip for Return

--A diode (energized only in one direction) is provided on one cap (insulation) of the rail, and the vehicle output from the power pack is repeatedly moved forward and backward by a timer.

[Features]
--Can be connected to a commercially available power pack.
--There are KATO and TOMIX depending on the connector.
--No special processing such as soldering is required.
――You can use your own power pack, so it's cheap.
--Using the return diode with clip (sold separately), you can enjoy manual turn-back operation only with the power pack.

[specification]
--Adaptive power pack
・ KATO 22-018 Standard SX
* AC adapter is limited to 12V for N
* 24-829 Accessory adapter required
--Adaptive rail
・ KATO Unitrack N ・ HO
・ TOMIX Fine Track N
--Time adjustment width: Approximately 5 to 60 seconds (one way)
--Current current allowable current: 1A maximum (vehicle power supply)
--Timer power supply: DC12V (powered from power pack)
--Dimensions / Weight: 70x104x35mm (excluding protrusions) 120g
- accessories
・ Two diodes with clips
·double-sided tape

Item Size/Weight : 13.8 x 13 x 4.9 cm / 178g