Only 30 pieces are to be manufactured.
- It is [Lamborghini Urakan GT32015] which I made as 1/43 scale handmade model car of [EIDOLON (idolon)].
- This model is a model that faithfully reproduced [Lamborghini Urakan GT 3] which is the race car of the Urakan.
- Until now, Urakan GT3 was entrusted to race car engineering development, but the Urakan GT3 was developed with `SquadraCorse` in the race section of Lamborghini and the famous` Dallara Outmobili` for the design and manufacture of race cars It was.
- The chassis is a hybrid structure of the same aluminum and carbon as URakan, but a race cage meeting FIA standards and a race suspension by hand of Dallara are set.
- The engine is equipped with a 5.2LV10 engine of the road car, but the output is reduced to about 500hp by regulation.
- The exterior is thoroughly reworked by the hand of Dallara.
- In order to improve aerodynamics we aim to make maximum use of traction by changing part of the front and rear subframes and earning downforce.
- The wide body cowl is mostly made of carbon.
- The model created 3DCAD data from 3D data provided by Lamborghini.
- As much as possible without doing the difference form, the real car itself will reproduce the atmosphere.
- Because there are a lot of thin parts on the fender and overall, the finish was thin so that the thickness is inconspicuous.
- The interior is peeled off for the purpose of weight saving in the interior, and the roll cage and the bucket seat stipulated by the regulation, etc. are added and reproduced.
( This is a machine translation. Please allow for possible misinterpretations in the text. )