Product Description

Remove air filter air regulator with water (reduced pressure regulator). [SL change screw] with two can respond to L size.
Can be combined with the air brush holder.

Accessories: SL change screw × 2, regulator seat

※ hose mounting section is made up to (1/8) S screws.
※ connect the hose from the compressor to the left, please connect the hose to the airbrush from the right.
Connection is done in the wrong direction, you can not vacuum or air leakage.

※ air regulator and ...
The compressor has been set but each specified pressure, you may feel depending on the type of paint or spray paint place, and is too strong (momentum out of the air) pressure. Can be decompressed to the pressure of your choice, to do the work smoothly if you use a regulator.
In addition, depending on the type of compressor and some are equipped with standard regulator.

※ air filter and is ...
Compressor is a device that draws air in the atmosphere, fed into the airbrush to compress it. You may for that, it captured along with moisture, would airbrush out of the water and made it. Season with high humidity, such as the rainy season, water frequently sisters out, you will not be able to work particularly smooth.
Those who want to resolve problems with water are recommended to use an air filter. Some air air filter and regulator are integrated. There are also those that are equipped with standard air filter to the compressor, this does not mean that water removal can be complete because it is a simple filter.



Weight : 396g

Product Specifications

Item code

MAFR-200

JAN code

4545257030388

Purchase Information