- The set includes: one 2 Mr Linear Compressor L5, Mr air regulator Mk.I, air brush holder × external straight..
・ PS hose straight 100cm (fine), PS hose straight 150cm (more)
PS264 Procon airbrush BOY WA0.3mm, joint 1, joint 3
- Air brush holder directly soldered directly attached to the body, so, effective in saving space. The regulator and airbrush
You can put.
- High reliability and quiet operation sound. Standard model compressors.
. Linear Compressor L5 Mr is directly driven by electromagnetic force compression piston. Since there is little conduction mechanism to generate the driving noise
Operating noise is very quiet. I can also work at night in peace.
-. Mk.I Mr air regulator to adjust the amount of air to remove the moisture.
Features decompression, drainage, branched, with two locations air discharge ports, can connect up to two airbrush.
PS cap standard (thin), standard hose 1/8 (S) can be connected.
- A general-purpose airbrush most tractable, PS264 Procon BOY WA Double Action
Drop double action formula. 0.3mm nozzle diameter, 10cc cup capacity
-. Mr Linear Compressor L5 (specifications)
Compressor for airbrush paint, gas adaptation: application of air this unit, rated pressure: 0.1MPa, the maximum pressure: 0.12MPa
5.27l/min.0.05MPa, rated time: continuous air delivery, the operating noise: (no load) 50dB,
PS With joint for 1/8 (S), and the rated voltage (thin): the discharge port size AC100V, rated power consumption: 31/29W,
50/60MHz, body dimensions: height 160mm rated frequency width 120mm × 160mm × length, body weight: 2.4kg
-
PS301 some changes to the contents of, was employed with a direct holder.
( This is a machine translation. Please allow for possible misinterpretations in the text. )