Product Description

――The directly attached airbrush holder is attached directly to the main body, so it is effective in saving space.
-You can put an airbrush or a regulator.

--Quiet operation noise and high reliability.
--Standard compressor for models.

--Mr. Linear compressor L5 drives the compression piston directly by electromagnetic force.
--Since there are few conduction mechanisms that generate drive noise, the operating noise is very quiet.
――You can work at night with confidence.
--The pressure gauge allows you to adjust the flow rate while checking the air pressure.
--Mr. Air Regulator Mk.IV (with pressure gauge) has [decompression], [drainage], and [branch] functions.
--Equipped with two air outlets, up to two airbrushes can be connected.
--Hose of base PS (thin) standard and 1/8 (S) standard can be connected.

--Set contents: Mr. Linear Compressor L5, Mr. Air Regulator Mk.IV, Directly Attached Airbrush Holder x 2, Joint 3 x 2 (At the time of shipment, it is attached to the L5 outlet and the regulator body.)

[Mr. Linear Compressor L5 (Specifications)]
--Application of this machine: Compressor for airbrush painting
--Adaptive gas: air
--Rated pressure: 0.1MPa
--Maximum pressure: 0.12MPa
--Discharged air volume: 5.27l / min.0.05MPa
--Rated time: Continuous
--Operating sound: 50dB (no load),
--Discharge port size: With joint for PS (thin) and 1/8 (S)
--Rated voltage: AC100V
--Rated power consumption: 31 / 29W,
--Rated frequency: 50 / 60MHz
--Body dimensions: Length 160mm x Width 120mm x Height 160mm
--Body weight: 2.4kg

* Airbrush is not included in this set. Please prepare an airbrush and an air hose separately. (GSI Creos airbrush sold separately, or commercially available hose base 1/8 (S) standard airbrush and air hose are all compatible.)

--Partially changed the contents of PS303 and adopted a direct attachment holder.


Item Size/Weight : 35.7 x 21.2 x 19.6 cm / 3000g

Product Specifications

Item series

Mr.Linear Compressor

Item code

PS313 *

JAN code

4973028111088

Purchase Information