Product Description

- Completely redesigned, easier-to-use, ultra-precision tool it is easy to grasp the evolution.
Use steel, quenching, and specifications are the same, but not Shogyo eight chamfers,
I also support the specification of both sides. Weight distribution in the U.S. designer, Ford,
It is an article that I had to pursue more performance and ease of grip.
- Wear-resistant steel produced using Sweden, hang in there, it is an excellent tool in hardness.
If the material is strong Katakere of course, there is a lack Innovation Polo inflexible and too hard.
Say and steel (steel) that of iron that contains carbon, it was compressed to extend my I is a steel plate.
I made the cut in the steel wire that I am NANOMI. I have become stronger and mix the carbon,
Too hard because it may brittle, increasing the hardness, etc. I put another metal element.
Manganese Mn, Ni Ni, chromium Cr, Mo Mo, put the boron V,,
It put the so-called small amount of silicon, and vanadium in addition to that this [high tensile strength steel]
Make (so-called high-tensile steel) high tension steel. I applied to this high-tensile steel quenching.
Task of quenching is heated to about 1000 degrees at once, up to minus 30 degrees and 60 degrees at once and then
Cool. Change the physical properties of the metal in this work called quenching.
(Explosive change occurs at 910 degrees Celsius, transformation point)
State called austenite by heating, I transformed into an organization called the quenched martensite.
Mr. craftsmen carefully one by one wearing a metal blade with a hardened, I go with the abrasive doctor.
I have about 30 000 yen about this one, make custom knives and scissors and a knife in the same metal
I have also used (knife with elaborate carved antler, and ivory pattern originated in the United States).
Shows a hardness of 60 degrees hardness (hard Rockwell) HRC, 60 degrees is close to Japanese sword.
- Use an oil stone oil and abrasive cutting edge technology. (Covered in art supply store in the drafting, for abrasive knife skills)
- Sewing machine oil is oil, oil stone towards Al Stone Kansas is often abrasive Masu lift if possible.

★ NANOMI Nanomi width chisel 0.5mm (tools) are also available.
★ marking needle (tool) is also available.



Weight : 100g

Product Specifications

Item code

FL10

JAN code

2063553162821

Purchase Information