--The M4A3E2 Sherman `Jumbo` was developed as an assault tank for infantry support based on the late model of the M4A3.
――Welded 1.5 inch additional armor on the front and sides of the car body, reduced the gear ratio of the differential cover, and replaced it with a thickened special type.
-The turret is based on the T23 turret, which was the origin of the 76mm turret, and is equipped with a thickened one all around, and the shield has a welded armor added to the cast base, reaching a maximum thickness of 177mm.
――In order to cope with the increased weight, the caterpillar was equipped with an extension end connector called Duckville, and it was supported by lowering the ground pressure.
--The M4A3E2 produced 254 vehicles from May to July 1944 and was deployed to the US and Free French Forces tank units on the Northwestern European Front.
――Some vehicles were used by local troops with the main gun replaced with a 76mm gun, and they unfortunately demonstrated their defensive power as a forerunner of infantry support.
--The M4A3E2 Sherman `Jumbo` was developed as an assault tank for infantry support based on the late model of the M4A3.
-Increased armor is made into parts by attaching it to the upper part of the car body.
-The turret shape peculiar to jumbo is also accurately reproduced.
--There are two types of main guns, 75mm and 76mm. The caterpillar is a T48 type with a duck building added to the outside.
――Three types of road foil are available, including a big hub wheel with a larger center hub.
--Includes 4 types of US military markings on the Northwest European Front.
* Tank soldiers are not included in this kit.
* This is a product of the old Tusca model.
( This is a machine translation. Please allow for possible misinterpretations in the text. )