Ultra-high viscosity instant adhesive ─ ─! Serve! Fill! Strong bonding!
- A rubber-like instant adhesive putty for use in the same sense. In combination with a curing accelerator, speedy
Shaping can be done. Because the clear color, easy to conceal even after orthopedic surfacer thin
Suitable for models that require thin film.
Mixing and filling in the sense Poripate baby powder can be cut
The yellow adhesive hardens slightly and clear parts for curing accelerator used is not suitable.
Without a cure accelerator is 5-3 in 20 minutes. Positioning can be slow.
If you want to work speedily, please use the accelerator.
You can paint with colored lacquer adhesive. The amount of mixing is not easily cured or
So, please use at your own risk after the test.
The high hardness, it takes extra time to work with the amount of sharpening too. And plates out on
We recommend using a toothpick in paint. (Cut with sandpaper but still about 3.2 million in liquid
Suitable. When using baby powder 削Remasu from # 400)
What are suitable for use where ※, then please use the test in advance.
To order parts and clear adhesive hardens slightly yellow ※ If you use the curing accelerator is not suitable.
※ After opening the moisture deterioration (increased viscosity) that advances only. Keep it always came with a bag,
High humidity season, please keep it in the refrigerator.
- Net weight: 20g
( This is a machine translation. Please allow for possible misinterpretations in the text. )