Product Description
[About the actual vehicle]
――In World War II, the Japanese Navy developed and equipped the amphibious tank Type 2 Ka-Mi with the cooperation of the Army as one of the equipment of the Army Squadron.
――The base was the Type 95 light tank of the Army, which adopted a welded structure entirely and equipped the hatch with a rubber seal.
-The turret uses the turret of a Type 2 tank.
--The main gun is equipped with a set of 37mm tank guns.
――Equipped with removable floats on the front and rear of the car body to obtain buoyancy, it was possible to run amphibious.
-The float was removed after landing and continued to advance as a normal tank.
--There were two types of front floats, the early type, which was an integrated type, and the late type, which was split into left and right.
――After being formalized in 1942, about 180 cars were produced by the end of the war.
――It was first introduced into actual battles in Saipan, and was active in each battlefield set in the southern islands such as New Guinea.
[About the model]
-The model reproduces the body part of the Japanese Navy amphibious tank, Type 2 Ka-Mi (Kami) on 1/72 scale.
--Modeled based on data measured from vehicles that survived on Peleliu Island.
――The reproduction unique to the dragon firmly expresses the characteristics of the actual vehicle.
--The shape of the upper part of the car body, which is a combination of flat surfaces, is modeled as an integrated part using a 3-way slide mold.
――The attachment parts of the car body to which the float is attached and the sharp details of the ventilation grille also enhance the finish.
--The lower part of the car body is also integrally molded with a slide mold.
-Details on the sides and bottom are also reproduced in detail.
――The realistically expressed sprocket wheels and suspension arms tighten the suspension.
-The track uses a DS track that is easy to assemble.
-Also, it is unique to Kami that the screw installed on the rear part of the lower surface of the car body is reproduced.
-Also, the turret is realistically reproduced from the shape to the details of details.
--The hatch can be assembled by selecting opening and closing.
[Major features]
--Reproduce the Japanese Navy amphibious tank, Type 2 Ka-Mi `Kami` on 1/72
――The shape and details of the upper and lower parts of the car body are expressed in detail using 3-way slide molds.
--The screw parts unique to amphibious vehicles are realistically reproduced at the rear of the lower part of the vehicle body.
--Details on the sides and bottom are also reproduced
--The track uses a belt-type DS track that is easy to assemble.
--Hatch can be assembled by selecting opening and closing
--Completion size: Approximately 57mm in total length
( This is a machine translation. Please allow for possible misinterpretations in the text. )
*Please note that product specifications are subject to change.
Item Size/Weight : 25.9 x 16.2 x 4 cm / 103g
Product Specifications
- Item code
- DR7435
- JAN code
- 4545782125078
Purchase Information
This item is limited to 3 per household.