- When creating a model of motorcycle, the problem would not be in the plating of the front fork parts
Or?
Plating kit also be necessary to process the parting line is then dropped plating
I arise.
Shades reproducible flame plating things that are not plated, but is not that part also apply to silver
I think there are a lot trouble with the paint or properly use, the special.
- Did answer to a request from Mr. modeler like that this time is a commodity.
Dimensions taken from the 1/12 scale motorcycle kit number. Decided to expand the size of the four
I will.
- Not like to cut the pipe sleeve generally present standards, plating was carried out, only
Chrome plating treatment process is performed.
Since I Motaseru functions fitted to each other pipes, character models reproduce part of cylinder
You can also use the like.
Since the very thin wall thickness can be cut to the desired dimensions provided in such as a knife that I can
Award.
- Because the same thing and chrome plating process, the plating is applied to the plastic parts of the kit and reproduce in paint
I will feel calm than color.
※ ANE-0210 and ANE-0209, ANE-0208 ANE-0207 and I will be fitting.
[Basic dimensions]
- 35mm length 0.2mm thickness φ3.0mm φ3.4mm inner diameter outer diameter
- Material: Brass
- Surface treatment: Chrome plating
( This is a machine translation. Please allow for possible misinterpretations in the text. )