This item is limited to 5 per household.
- The metal parts of the slotted screws type of classic. NC lathe machining stainless steel.
It is a metallic color that calm in unpainted, but precision stands out more when you paint.
Warhead and missile parts, as compared to the plastic parts, and gate processing unnecessary, sanding
You can order unnecessary, to detail up the impression that high accuracy in a short time easily.
Negative mold Quantity revised up to 1.3 ~ 3.0mm, followed by price increases, but also large size from 3.5mm
It will be revised.
It is 10 pieces from 20 pieces, it has been changed to make it easier to buy more than one size.
- The replacement of parts or parts existing ones sawing metal
- To rivet detail newbuildings minus bolt wind
- The detail up negative bolt shape which gave the design to the new character models
Is a part.
Can not be obtained by the diversion of screws and precision, ease of use and angles are possible features.
Because it is a part of the rivet type with a pin on the lower surface, even after coating the part to be attached,
It can be installed by the cover from the top.
- It's easy to use. You can open a big hole than 0.1mm hole of the same diameter as that of foot parts you want to install, and diluted
OK if you bonded with low whitening instant adhesive very small amount and clear bond.
You can also use the model for paint and normal metal primer, if you paint the surfacer.
- If you divert the precision screws, burr or remain in the pickpocket absolutely, cutting surface or are rough
And then, but there is no such a thing in this product.
It has been a polite post-processing to be used without paint. You certainly get the quality of specialized products only
Please the eye.
- Size lineup
1.0mm diameter of the head, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm
※ foot diameter 0.5mm only 1.0mm, others are 1.0mm
- Stainless steel
- The height of the head may vary depending on the diameter, please select it by referring to the image.
I will be flat as a large diameter
( This is a machine translation. Please allow for possible misinterpretations in the text. )