This item is limited to 4 per household.
- Tip for detail up parts of firearms such as in mechanical model. Muzzle part of the gun
Was targeted at Intermediate or more you want to sharpen the tip, do you wish to make representation more precisely
Item. It is the part that is used to replace the part to be replaced, but it was not conventional products,
Is provided with a pin of mounting, it was easier to use. Also processing was difficult in embedded system,
The presence of the pin, Suppress and too spread out of the hole, the failure orientation such as accidentally twist.
Color, two-color gold, silver. in which the same color with the cutting brass, silver
If the shades of green body brass (brass is oxidized, nickel-plated, gold Con
Brightness is increased when polish pound. Plating polishing impossibility).
- Combination example: by a combination of long and short specific size
It is possible to use in the double. I can easily perform the color-coded in this case.
- Can be combined size:
Regular 1.5 1.0 + Short
Regular 2.0 1.3 + Short
- Adhesion by filling in a hole of the same size as the pin for attachment to the part you want to install, as shown in FIG.
Fixed. Further, in the case to be embedded and bonded embedded in a hole of the same size as the outer diameter.
I want to reduce the pop-out parts of a kit or you want to replace is not jumping out short
I use to place. It is the size, regular average. Also other than the tip of firearms such as,
I can also be used to replace and small thrusters. The epoxy adhesive bond clear recommendation.
( This is a machine translation. Please allow for possible misinterpretations in the text. )